CS240DM
 
CS240DM PT-1000 Class A, Back of Module Temperature Sensor (-40 to +135C) w/Digital Modbus RS-485 Output
 
Standard Options
-S1 -S1 w/17ft (5m) & PT
-S2 -S2 w/50ft (15m) QC & PT
-S3 -S3 w/150ft (45m) QC & PT
-S4 -S4 Sensor Head Only w/QC
-U -U User Defined Conf
-U User Defined Config - show details
  -L ft cable per sensor

Allowed values: 1-1000 ft, increments of 1 ft

-U Cable Termination Options
  -PT -PT w/Tinned Wires
  -PW -PW w/Pre-Wire Connector
 
Temperature Calibration
-NC -NC w/No Calibration
-CC -CC w/3-Pt Calibration

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

 
The 27015 is a 5 yd roll of Kapton Tape. This tape is recommended for fastening our surface mount temperature sensors to their measurement surface when the temperature may exceed 70°C.

Other Accessories

MeteoPV
 
The MeteoPV Solar Resource Platform delivers key photovoltaic (PV) resource data used in PV system analysis and performance assessment. It is the only purpose-built PV resource data platform on the market, and it is ideal for distributed PV monitoring and as a plane-of-array (POA) sunstation on large solar farms.
CS240DM3TPCBL-L
 
CS240DM3TPCBL-L CS240DM 3-Twisted Pair Shielded Cable
 
The CS240DM3TPCBL-L includes a connector on one side of the cable for mating any user-specified length of 9721 Santoprene-jacketed cable to a CS240DM. The other side of the cable is pigtailed and tinned. The cable is a three-twisted pair, 24 AWG cable that has a Santoprene jacket. Insulation colors of the twisted paris are red/black, green/white, and blue/yellow. An aluminum Mylar shield is grounded via a drain wire.
CS240DM3TPCBL-L Options - show details
-L ft cable per sensor

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
21212
 
The 21212 is used to seal exposed connections. The 21212 is a 10-ft roll of black self-vulcanizing tape.

Replacement Parts

33258
 
The 33258 is the sensor head of the CS240DM only, with quick connector. It is generally purchased as a replacement when the user needs a newly calibrated sensor head but doesn't want to replace the entire cable. The quick connector allows the user to replace the sensor head without replacing the entire cable, which could be hundreds of feet in length. The 33258 only works as a replacement for the original CS240DM that was purchased with the -Q option.
CS240DMCBL-L
 
CS240DMCBL-L CS240DM Replacement Cable
 
The CS240DM cable is used for differentially transmitting data and power (POE) over twisted pair to the CS240DM. The cable is a premium industrial Ethernet cable with several special attributes. Characteristic impedance is controlled for each twisted pair, making it suitable for maintaining high signal fidelity on the RS-485 signals with minimal signal reflections and excellent noise rejection. Jacket material is designed for outdoor use including UV exposure resistance and temperature performance of -40 to +75°C. Agency approvals include UL AWM Style 2463 (80C, 600V) and NEC/CEC (UL) CMX OUTDOOR. The cable has a high-flex construction with a jacket that can be pulled in conduit. It is also resistant to weld spatter and oil.
CS240DMCBL-L Options - show details
-L ft cable per sensor

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
33622
 
The 33622 has a length of 15 m (50 ft). The CS240DM cable is used for differentially transmitting data and power (POE) over twisted pair to the CS240DM. The cable is a premium industrial Ethernet cable with several special attributes. Characteristic impedance is controlled for each twisted pair, making it suitable for maintaining high signal fidelity on the RS-485 signals with minimal signal reflections and excellent noise rejection. Jacket material is designed for outdoor use including UV exposure resistance and temperature performance of -40 to +75°C. Agency approvals include UL AWM Style 2463 (80C, 600V) and NEC/CEC (UL) CMX OUTDOOR. The cable has a high-flex construction with a jacket that can be pulled in conduit. It is also resistant to weld spatter and oil.
33624
 
The 33624 has a length of 45 m (150 ft). The CS240DM cable is used for differentially transmitting data and power (POE) over twisted pair to the CS240DM. The cable is a premium industrial Ethernet cable with several special attributes. Characteristic impedance is controlled for each twisted pair, making it suitable for maintaining high signal fidelity on the RS-485 signals with minimal signal reflections and excellent noise rejection. Jacket material is designed for outdoor use including UV exposure resistance and temperature performance of -40 to +75°C. Agency approvals include UL AWM Style 2463 (80C, 600V) and NEC/CEC (UL) CMX OUTDOOR. The cable has a high-flex construction with a jacket that can be pulled in conduit. It is also resistant to weld spatter and oil.