CS220-L Surface Mount Type E Thermocouple Sensor
Cable Length - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

The recommended cable length is 50 ft (CS220-L50). Specify a cable length of zero feet (CS220-L0) to get a replacement sensor that includes the stainless-steel overbraided cable, but not the thermocouple extension cable (see Specifications for more information).

Add to your Quote List

Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 2376 Adhesive-Backed Cable Tie Mount
(1) 4005 8 in. Nylon Cable Tie

Common Accessories

The 27015 is a 5-yd roll of Kapton Tape that is recommended for fastening the CS220 to the measurement surface when the temperature may exceed 70°C.

Replacement Parts

The 2376 consists of small, 3 cm square tabs with adhesive backing. The 2376 mounts attach to the inside of an enclosure to provide an anchor for attaching the cable ties. The cable ties, in turn, are used to secure cables and wires, thus providing strain relief and cable routing inside the enclosure.
These cable ties have a flexible, nylon construction. A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cables, then trimmed back to the locking end. After attachment, the cable tie must be cut to be removed.