Data Loggers / CR9000C
RETIRED ›
This product is no longer available and has been replaced by: CR9000XC. Some accessories, replacement parts, or services may still be available.
CR9000C
 
CR9000C Measurement and Control System
 
Product Details
Typically Ships Within 21 - 28 Days
Restockable No
Warranty
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Replacement Parts

8223
 
This "blank" (no circuit board or components) occupies one slot in the CR9000C chassis when the slot will be unoccupied by a functional I/O Module, thereby providing a degree of protection for modules in the adjacent slots.
8025
 
This battery powers the clock and RAM when the primary 12 Vdc power supply is not connected. The battery must be replaced when its voltage falls below 2.4 Vdc.
28878
 
This water vapor sensitive patch adheres to the inside wall of the enclosure. Patches on the card change color as humidity thresholds are reached providing a visual indication of the enclosure's internal humidity.
10659
 
The 10659 Strain Relief Adapter is attached to the chassis of the CR9000C datalogger, and then cable ties are used to fasten the cables to the adapter. By securing the cables to the data logger's chassis, the likelihood that the sensor cables will be "jerked" out of their screw terminals is reduced.
CR9011
 
The CR9011 Power Supply Module provides regulated power to the CR9000C from the internal battery modules. It also regulates battery charging from power supplied by the ac adapter, a dc input, or other external sources.
CR9041
 
The CR9041 A/D module provides amplification and signal conditioning for 16-bit, 100 kHz analog-to-digital (A/D) conversions.
1113
 
The 1113 is used to attach sensor leads to screw terminals.
 
The 8989 is a 110-to-240 Vac (input) to 18 Vdc (output) transformer/charger. It connects a wall plug source to the "Charger" receptacle on the CR9011 Card.