Basic Weather Sensors / CLIMAVUE50
CLIMAVUE50
 
CLIMAVUE50 Compact Digital SDI-12 Weather Sensor
 
Cable Length Options
-10 -10 w/10ft per sensor
-17 -17 w/17ft per sensor
-33 -33 w/33ft per sensor
-50 -50 w/50ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

17387
 
The 17387 is used to mount a ClimaVUE™50 to a crossarm. This mount includes a 17386 Mounting Tube, a right-angle bracket, two U-bolts, and four nuts.
CM300
 
CM300 23 inch Mounting Pole w/Cap
 
If you are not mounting the ClimaVUE™50 to a crossarm, tripod, or tower, there are three mounting pole options. The CM300 is one of these options. The CM300 is a 58 cm (23 in.), stainless-steel, 1.5 in. IPS vertical pole. It is designed for mounting sensors, enclosures, or other instruments, and is an ideal mount for remote sensors.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position. Each j-bolt includes nuts and washers.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
CM305
 
CM305 47 inch Mounting Pole w/Cap
 
If you are not mounting the ClimaVUE™50 to a crossarm, tripod, or tower, there are three mounting pole options. The CM305 is one of these options. The CM305 is a 119 cm (47 in.), stainless-steel, 1.5-in. IPS vertical pole. It is designed for mounting sensors, enclosures, or other instruments, and is an ideal mount for remote sensors.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
CM310
 
CM310 56 inch Mounting Pole w/Cap
 
If you are not mounting the ClimaVUE™50 to a crossarm, tripod, or tower, there are three mounting pole options. The CM310 is one of these options. The CM310 is a 142 cm (56 in.), stainless-steel, 1.5-in. IPS vertical pole. It is designed for mounting sensors, enclosures, or other instruments, and is an ideal mount for remote sensors.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.

Replacement Parts

ClimaVUE50CBL
 
ClimaVUE50CBL ClimaVUE50 Replacement Cable
 
The cable consists of three shielded conductors (24 AWG) insulated in polypropylene with a drain wire. The cable jacket is composed of black UV-resistant polyurethane. The ClimaVUE50CBL has an IP-67 rated M12 connector with stainless-steel knurl to resist corrosion in coastal and other harsh environments. The cable can be terminated with either stripped and tinned wires or fitted with a connector for our prewired enclosures.
Cable Length Options
-10 -10 w/10ft per cable
-17 -17 w/17ft per cable
-33 -33 w/33ft per cable
-50 -50 w/50ft per cable
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
34475
 
Part number 34475 is a replacement precipitation funnel for the ClimaVUE™50. This funnel also includes a calibrated pyranometer.  
34477
 
Part number 34477 is a replacement precipitation filter spring for the ClimaVUE™50.
34476
 
Part number 34476 is a replacement relative humidity (RH) and barometer sensor with cover for the ClimaVUE™50.
 
The 34136 replacement stainless-steel V-bolt with silicon bronze nuts is used to mount the ClimaVUE™50 to a vertical mast. The 34136 may be ordered to replace the original if it was damaged or lost.
18126
 
This 5/16" nut can be purchased to replace a lost or damaged nut.
4365
 
This flat 5/16" washer can be purchased to replace a lost or damaged washer.
4366
 
This lock washer may be purchased to replace a lost or damaged washer.