CDM-A116
 
CDM-A116 16-Channel 5V Analog Input Module
 
Temperature Ranges
-ST -ST -40 to +70C
-XT -XT -55 to +85C
Warranty Lengths
-SW -SW Standard 1yr Warranty
-XW -XW 4yr Warr Extension

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) Calibration Certificate
(1) 29389 Parts Kit for CDM Peripherals

Common Accessories

SC-CPI
 
SC-CPI Datalogger Serial to CPI Interface
 
The SC-CPI is needed when the CDM-A116 is used with non-CR6 dataloggers.
Temperature Ranges - show details
-ST -ST -25 to +50C
Every SC-CPI is tested and guaranteed to perform within published specifications over the standard temperature range.Units are tested and shipped to standard operating range unless extended testing is specified.
-XT -XT -55 to +85C
Extended temperature testing over the -55° to +85°C range is also available. Individual units are subjected to performance tests at these extremes in a test chamber. Units that pass the tests are certified as extended temperature units.
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the SC-CPI includes a standard warranty of 12 months. See our full warranty policy in the SC-CP manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our extended warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.
28899
 
The 28899 is a 2 ft RJ45 cable used for connecting CDM devices together or to a datalogger.
28900
 
The 28900 is a 10 ft RJ45 cable used for connecting CDM devices together or to a datalogger.
28901
 
The 28901 is a 50 ft RJ45 cable used for connecting CDM devices together or to a datalogger.
CAT5UCBL-L
 
CAT5UCBL-L CAT5e Cable Unshielded w/RJ-45 Connectors
 
This is an RJ45 cable that is ordered to a customer-defined length for connecting CDM devices together or to a datalogger.
Cable Length - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

29388
 
The 29388 is only needed for DIN-rail applications. This DIN-rail kit can facilitate wiring when several CDMs are connected to one terminal.
29370
 
One CPI network kit is required for each CDM network.
8125
 
If you're not ordering the datalogger on the same order, or if the screwdriver that came with the datalogger has been lost, you might need this small, flat-bladed screwdriver.
HUB-CPI
 
The HUB-CPI allows eight CPI devices to be connected together in parallel. Typically, this configuration includes one datalogger and up to seven CDMs or sensors that use CPI.

Replacement Parts

26031
 
The 26031 is a power connector that may be purchased to replace a lost or damaged connector.
29474
 
The 29474 is a ground lug with a slotted notch on its top that may be purchased to replace a lost or damaged ground lug.
29267
 
The 29267 Mounting Bracket fastens a CDM module to an enclosure backplate. This mounting bracket may be purchased to replace a lost or damaged bracket.
19343
 
Two of these screws are used to attach the 29267 Mounting Bracket to a CDM module.
29389
 
The 29389 consists of the 28898 6 in. RJ45 to RJ45 cable, the 9634 black and 9635 red power wires, two 505 screws, and two 6044 grommets.
30775
 
The 30775 may be ordered to replace a lost or damaged screw plug for the CH1-8 terminal. Two of the 30775 are required for all eight channels.
30776
 
The 30776 may be ordered to replace a lost or damaged screw plug for the CH9-16 terminal. Two of the 30776 are required for all eight channels.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
28898
 
The 28898 is a 6 in., unshielded, CAT6 network cable with RJ45 connectors. It is typically used to connect CDM devices together or to an SC-CPI.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
28490
 
The 28490 includes two wires—one red and one black. These wires differ only in their insulation color; they have the same same length (1 ft) and gage (18 AWG). The red and black wires are used to connect a Campbell Scientific power supply to a datalogger.