Product Details
Typically Ships Within 7 - 14 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 27555 USB 2.0 Cable, Type A Male to Micro B Male, 6/6.5 ft
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

31326
 
For use with the 17992. The 31326 is a GPS RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a GPS receiver with an SMA antenna connection. The other side connects to the GPS antenna/antenna coaxial cable with Type N connector. The surge protector passes up to ±6 Vdc, commonly needed for active GPS antenna applications.
31182
 
The 31182 is a magnetic mount GPS patch antenna. It is typically used where GPS reception is readily available and concern is low for snow buildup completely covering the antenna. The 31182 is also commonly used in cost-sensitive applications or applications that require a small-sized, low-profile antenna. This antenna connects to a GPS receiver with SMA connector. The antenna package is waterproof and corrosion resistant.
18017-L
 
18017-L GPS Antenna Cable
 
Need 1 per GPS Antenna
Cable Length - show details
-L ft per cable

Allowed values: 1-200 ft, increments of 1 ft

SC12
 
SC12 - Need when using with CSI Datalogger

Other Accessories

10873
 
This serial cable is used to connect the AL200 to the datalogger's RS-232 port.
21212
 
This 3.1 m (10 ft) roll of 1 inch-wide black self-vulcanizing tape can help protect the antenna connections. After connecting the coaxial cables to the antenna, wrap the tape around the connectors that are exposed to the environment.
31324
 
The 31324 is a GPS RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a GPS receiver with an SMA antenna connection. The other side connects to the GPS antenna/antenna coaxial cable with Type N connector. The surge protector passes up to ±6 Vdc, commonly needed for active GPS antenna applications.
 
The 19334 is a factory-installed 17 in. (43.2 cm) cable with an SMA connector on the inside of an enclosure and a Type N connector on the outside for attachment of an antenna.
 
The 19336 is a factory-installed 17 in. (43.2 cm) cable attached to an SMA connector on the inside of an enclosure, providing an SMA connector on the outside for attachment of an antenna.

Replacement Parts

7843
 
The 7843 is the 2-pin, detachable, power supply connector (green) supplied with the AL200. This detachable plug can be easily replaced by the user.
28750
 
The 28750 is a replacement connector for the AL200.
193
 
This spacer is needed if screws are used to secure the cable to the device.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.