This Li-Cor Pyranometer has been generally replaced by the LI200X-LC. The LI200S-LC is essentially the same sensor as the LI200X-LC except it requires a unique calibration entry for each probe.
This version of the LI200S pyranometer has a connector rather than the standard pigtails. The connector attaches to the MetData1 Weather Station or CS110 Electric Field Meter. The LI200S measures total sun and sky solar radiation using a silicon photocell. The sensor should not be used under vegetation or artificial lights. The LI200S must be leveled using an LI2003S Base and Leveling Fixture.
The "-LC" version of this product terminates in a connector (instead of pigtails) for use with a CS110 Electric Field Meter or MetData1 Weather Station. The length of the cable is specified at the time of order.
Number of FAQs related to LI200S-LC: 2
The information included on a calibration sheet differs with each sensor. For some sensors, the sheet contains coefficients necessary to program a datalogger. For other sensors, the calibration sheet is a pass/fail report.
This depends on the information contained in the calibration sheet: