This download is for the CR1000X datalogger. Execution of this download places the Operating System file(.obj) on your computer. It also updates the CRBasic Editor compiler and support files.
Caution: Those updating to OS 5 with a cellular modem using PPP should make sure the setting PakBus/WS Enable is disabled “0” if not needed. Failure to do so can result in higher cellular data usage.
This setting can be found using the Device Configuration Utility. Go to the Settings Editor [Tab]--> Network Services--> Pakbus/WS Enabled. Set the setting to “0”.
Why Update? Along with new features and bug fixes, this OS contains a change in the internal power up sequence for making analog measurements which eliminates calibration and measurement errors that have occurred in a small percentage of dataloggers. We recommend that all CR1000X dataloggers be updated to this new OS. For further details, see the associated customer notification.
With this OS update it is recommended that you also update the Device Configuration Utility to the most recent version so that new datalogger features are available in the utility.
Note/Warning: Campbell Scientific always recommends updating operating systems on site if possible. When remote updates are required, it is recommended that you implement the necessary precautions to handle unexpected OS upload complications. All datalogger settings should be retained when updated remotely. If you choose to roll back to a previous operating system, the datalogger settings will be reset to default.View Update History