The CS10 monitors ac current along an electrical wire for the range of 0.15 A to 200 A. It outputs a millivolt signal that many of our data loggers can directly measure.Read More
The "-L" on a product model indicates that the cable length is specified at the time of order.
The CS10 uses CR Magnetic's CR8459 Current Transformer to detect the ac current along an electrical wire using the magnetic field that is generated by that current. The CS10 is external to the wire jacket and has no direct electrical connection to the system.
The CS10 is recommended for measurements that do not require high accuracy, such as motor or generator load condition monitoring, efficiency studies, intermittent fault detection, and rough submetering.
|Measurement Range||0.15 to 200 A|
|Frequency||50 and 60 Hz|
|Insulation Resistance||100 MΩ (@ 500 Vdc)|
|High Potential||2000 V|
|Rated Current||200 A|
|Accuracy with 10 Ω Maximum Burden (resistive)||Typically ±5% of actual value (with provided multiplier)|
|Operating Temperature Range||-25° to +55°C|
|Case Material||Polypropylene resin|
|Outer Diameter||4.8 cm (1.89 in.)|
|Inner Diameter||1.9 cm (0.75 in.)|
|Height||1.7 cm (0.67 in.)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Number of FAQs related to CS10-L: 2
Yes. Three CS10-L sensors can be connected to a data logger to measure the amperage on each of three phases.