# 4 New Ways to Use Array Notation: Complex Scaling

by Janet Albers | Updated: 07/01/2015 | Comments: 0

### Tags

Array CR1000 CR3000 CR6 CR800 CRBasic Operating System

### Subscribe to the Blog

Set up your preferences for receiving email notifications when new blog articles are posted that match your areas of interest.

### Suggest an Article

Leave this field empty

You can perform more complex scaling in an array without needing a For/Next loop. To take advantage of this feature, use OS 28 (CR6 OS 01) or later.

In this example program, a unique set of multipliers and offsets is applied to the column of an array:

```
Public Da(3,2) = {1,1,1,1,1,1}'3 rows, 2 columns. All initialized = 1
Public Db(3,2) '3 rows, 2 columns
Public DMultiplier(3) = {10,100,1000}
Public DOffset(3) = {1,2,3}
'Main Program
BeginProg
Scan (1,Sec,0,0)
'scale the first column of Da
'by corresponding multiplier and offset
'store the results in the first column of Db
Db(-1,1)() = Da(-1,1)() * DMultiplier() + DOffset()
'set second column of Db to NAN
Db(-1,2)() = NAN
NextScan
EndProg
```

This is what the results look like in the Connect Screen’s Table Monitor:

To use the new capability of OS 28 (CR6 OS 01) most effectively, there are some rules you should be aware of:

• An empty set of parentheses designates an array-assigned expression. For example, reference array() or array(A,B,C)().
• Only one dimension of the array is operated on at a time.
• To select the dimension to be operated on, negate the dimension of index of interest. For example, to operate on the dimension “B,” the syntax is array(A,-B,C).

Note: This new syntax does not affect how repetitions within instructions write to, or read from, variable arrays. To see how to use array notation and repetitions within measurement instructions, watch the “CRBasic | Advanced Programming” video.

Tip: After updating your operating system, it’s a good idea to check your existing programs to ensure they continue to run as expected.

For more information about, and examples of, multi-dimensional arrays, we have several resources to help you. You can search for the section in your data logger manual titled “Array-Assigned Expression.” The CRBasic Editor Help application in LoggerNet is also a good resource. For example, search for “multi-dimensional arrays”:

Campbell Scientific’s newest data logger operating system (OS 28 for the CR800CR1000, and CR3000; OS 01 for the CR6 datalogger) enables you to use Array Notation in CRBasic multi-dimensional arrays in new ways. This article explored one of these methods—complex scaling. Two other methods, simple scaling and initializing multi-dimensional arrays were discussed in the first two articles in this series. One other method, copying or transposing, will be discussed in an article to follow.

Do you have comments or questions? Feel free to share them.