Campbell Scientific offers several different multi-day training courses for our dataloggers and software. These comprehensive courses are designed for those without much datalogger experience, or for those wanting to increase their knowledge. The courses have an emphasis on programming; see individual courses for itinerary. "Hands-on" programming exercises and course handouts are used to reinforce the concepts covered by the instructors.

Listed below is a synopsis for each course.  Please register for the course that aligns with your needs.

CR1000/LoggerNet Training (2.3 CEUs)
This is an introductory, hands-on training course. It is intended for students from all disciplines. (See other course descriptions for discipline-specific courses based around the CR1000.)  This course is based around LoggerNet and the CR1000, but it is relevant for users that have a CR3000, CR1000, CR800, CR6, CR300-series, or CR200X-series datalogger.

Structural and Geotechnical Instrumentation Training (3.0 CEUs)
This course was specifically designed for the Structural and/or Geotechnical practitioner. It is an intense, hands-on training course using sensors and techniques common for structural and geotechnical monitoring systems. This course is based around LoggerNet and the CR6, but it is relevant for users of all CRBasic dataloggers (CR200X, CR300, CR800, CR1000, CR3000, CR5000 and CR9000X) from these disciplines.

Open-Path Eddy Covariance (OPEC) Training (2.6 CEUs)
This course focuses on the proper use of Campbell Scientific equipment in eddy-covariance measurements. This course does not cover micrometerology theory. Basic theory and assumptions used will be noted with respect to proper use and installation of eddy-covariance systems. This course uses the CR1000 datalogger, EC150 Open Path Gas Analyzer, and LoggerNet software.

CR9000X/RTDAQ Training (2.4 CEUs)
The CR9000X course covers programming/applications using RTADAQ software with the CR9000X datalogger. RTDAQ is for those requiring real-time data acquisition and fast scan or measurement intervals.  Take the CR9000X course if you have a CR9000X or CR5000.

Driving Directions from SLC Airport

A self-study course is also available for training on our CR1000 datalogger. You will need a datalogger, power supply, and a PC running LoggerNet. Please contact our training coordinator for pricing and course information. 

Not seeing what meets your needs? Contact Campbell Scientific for training at your location or customized courses.

Scheduled Training Courses

February

5

CR1000/LoggerNet Training

February 5-8, 2018 | Logan, UT

The CR1000 and LoggerNet 4.x Training Course is a comprehensive, introductory level course suitable for both the experienced Edlog datalogger user and new users. In the first three days there will...read more

Registration Closed

March

5

CR1000/LoggerNet Training

March 5-8, 2018 | Logan, UT

The CR1000 and LoggerNet 4.x Training Course is a comprehensive, introductory level course suitable for both the experienced Edlog datalogger user and new users. In the first three days there will...read more

Register (5 seats available)


26

Open Path Eddy Covariance Training

March 26-29, 2018 | Logan, UT

Open Path Eddy Covariance Training (OPEC) This course uses the EC150, Open Path Gas Analyzer instead of the LI-7500A The Open Path Eddy Covariance Training (OPEC) course covers the proper use of...read more

Register (10 seats available)

April

9

CR1000/LoggerNet Training

April 9-12, 2018 | Logan, UT

The CR1000 and LoggerNet 4.x Training Course is a comprehensive, introductory level course suitable for both the experienced Edlog datalogger user and new users. In the first three days there will...read more

Register (10 seats available)


16

Structural and Geotechnical Instrumentation Training

April 16-19, 2018 | Logan, UT

The Geotechnical and Structural Instrumentation Training Course is a comprehensive course that introduces engineers and engineering technicians to automated data acquisition. It emphasizes applications and sensors for the geotechnical and...read more

Register (11 seats available)

September

24

Structural and Geotechnical Instrumentation Training

September 24-27, 2018 | Logan, UT

The Geotechnical and Structural Instrumentation Training Course is a comprehensive course that introduces engineers and engineering technicians to automated data acquisition. It emphasizes applications and sensors for the geotechnical and...read more

Register (12 seats available)