RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
SAT HDR GOES High Data Rate GOES Transmitter

Overview

The SAT HDR GOES complied with the High Data Rate (HDR) specifications. This transmitter was NESDIS certified for low and high data rates—including 100, 300, and 1200 bps. The SAT HDR GOES supported transmission lengths from 1 to 120 seconds. Short transmission lengths enabled multiple stations to use the same NESDIS-assigned window. The transmitter had an internal GPS receiver that acquired time and the PPS signal.

Images

Specifications

Standard Operating Temperature Range -40° to +50°C
Dimensions 22.4 x 14.2 x 3.8 cm (8.8 x 5.6 x 1.5 in.)
Weight 771 g (1.7 lb)

Compatibility

SAT HDR GOES Compatibility by Datalogger

CR200 Series CR800/CR850 CR1000 CR3000 CR9000X

SAT HDR GOES Compatibility by Retired Datalogger

CR500 CR510 CR10 CR10X 21X CR23X CR9000 CR5000 CR7X


Compatibility Notes:
CR200: CR295 and CR295X only

Downloads

SAT HDR GOES v.3.2.4 (505 KB) 02-01-2005

HDR GOES Support software and Operating System. SAT HDR GOES update for 2004 leap year and reset issues. Follow the instructions in the README.txt file for installing the new OS. ( Includes DCPComm version 1.9 build 3 with Windows XP Service Pack 2 support. )

CR10X OS v.1.23 (1.45 MB) 04-02-2010

Execution of this download installs the CR10X Operating System (Mixed-Array) on your computer.  

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.  Requires an SC32A or SC32B.


CR23X OS v.1.19 (690 KB) 03-28-2006

Execution of this download installs the CR23X Operating System (Mixed-Array) on your computer.

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger.


CR510 OS v.1.15 (640 KB) 03-28-2006

Execution of this download installs the CR510 Operating System (Mixed-Array) on your computer.

Note: The Device Configuration Utility is used to upload the included operating system to the datalogger. Requires an SC32A or SC32B.