Software and OS Downloads
10 results for "CR6"
- CR6 OSv14.5.1Login required
April 17, 2026
OS and FirmwareThis download is for the CR6 datalogger. Execution of this download places the current CR6 Operating System file(.obj) and WiFi, RF45x and RF4xx operating systems (iobj) on your computer. It also updates the CRBasic Editor compiler and support files. Why Update? New features and bug fixes. With this OS update it is recommended that you also update the Device Configuration Utility to the most recent version so that new datalogger features are available in the utility. Note: Campbell Scientific always recommends updating operating systems on site if possible. When remote updates are required, it is recommended that you implement the necessary precautions to handle unexpected OS upload complications. All datalogger settings should be retained when updated remotely. If you choose to roll back to a previous operating system, the datalogger settings will be reset to default. Watch the Video Tutorial: Sending an OS to a Local Datalogger.
- EasyFlux DL for CR6OPv2.02Login required
October 31, 2025
Software ApplicationsCR6 datalogger program for Campbell open-path eddy-covariance systems.
- CR6 Web Browser Interfacev1.2Login required
September 13, 2024
OS and FirmwareStandard Datalogger Web Browser Interface Use this download to update the dataloggers web browser interface. To install this file, send it to the datalogger using file control found in the Device Configuration Utility or file control found in LoggerNet. This interface is recommended for fast IP interfaces like Ethernet and WiFi. It does NOT perform well over slow communications mediums like cellular. Note: This is NOT for system dataloggers that have custom interfaces like the SunSentry, Hydro-Link, Alert205, and MeteoPV.
- EasyFlux DL for CR6CPv1.08Login required
June 13, 2024
Software ApplicationsCR6 datalogger program for Campbell closed-path eddy-covariance systems.
- SnowVue Program Example for GRANITE-Series, CR6, CR1000X Dataloggersv1Login required
November 3, 2021
Software ApplicationsTwo programs that read the SnowVue 10 sensor. One program performs temperature compensation to provide snow depth. The other program uses extended commands to send the air temperature and distance to ground to the sensor and the sensor calculates the snow depth. Both example programs are compatible with the GRANITE-series, CR6, and CR1000X dataloggers.
- TX326 and TX325 Program Example for GRANITE, CR6, CR1000X, or CR300 Data Loggersv6
October 18, 2021
Software ApplicationsGRANITE-series, CR6, CR1000X, or CR300-series data logger program for the TX326 and TX325 that sets up self-timed and random transmissions and reads diagnostic information. Another program is available for the TX325 with the CR3000, CR1000, or CR800-series data loggers because they are programmed differently.
- CSAT3BH CR6 Programsv2.03Login required
November 20, 2020
Software ApplicationsCR6 datalogger programs for the CSAT3BH with SDM and CPI communications protocols. Warning: This program is not intended for the CSAT3H Heater Controller Enclosure. Please contact Campbell Scientific for any questions regarding the CSAT3H Heater Controller program.
- CR6 RF407 Series OS Updatev2.0Login required
October 9, 2020
OS and FirmwareThis CR6-RF407 Series OS update is for the following: CR6-RF407 CR6-RF412 CR6-RF422 CR6-RF427 Use the Device Configuration Utility to perform this update. Note: This is not for the CR6-RF451.
- CR6 RF45x OS Updatev4.01Login required
October 9, 2020
OS and FirmwareThis CR6-RF45x Series OS update is for the following: CR6-RF451 CR6-RF452 Use the Device Configuration Utility to perform this update.
- CR6 Wifi OS Updatev5.03Login required
October 9, 2020
OS and FirmwareCR6 Wi-Fi OS update. This download includes the OS and the update procedure.