RETIRED ›
This product is no longer available and has been replaced by: TX321. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 7 - 14 Days
Restockable No
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

25316
 
This RHCP (Right-Hand Circular Polarized) Yagi antenna has a gain of 11.0 dBic. The 25316 must be aimed at the proper azimuth and inclination to hit the assigned satellite. An adjustable mounting bracket is included.
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
This RG8/U, low-loss, coaxial cable has a characteristic impedence of 50 ohms. The COAXNTN provides two type N male connectors for attaching the TX320 transmitter to the antenna.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31329
 
Used with the COAXNTN-L. The 31329 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the antenna connections. After connecting the coaxial cables to the antenna, wrap the 21212 tape around the connectors that are exposed to the environment.
17992
 
The 17992 GPS antenna is both jam resistant and submersible for greater reliability under field conditions. It requires a 18017 antenna cable and mounting hardware (7623 pipe, CM202-series crossarm, and CM220 or NU-RAIL connector).
18017-L
 
18017-L GPS Antenna Cable
 
The 18017 GPS Antenna Cable connects the 17992 GPS Antenna to the TX320 transmitter. The cable terminates in a TNC connector on one end and an SMA connector on the other end. The 18017 is required if the 17992 is ordered.
Cable Length - show details
-L ft per cable

Allowed values: 1-200 ft, increments of 1 ft

7623
 
The 7623 aluminum pipe is used to mount the GPS antenna to a crossarm. The pipe attaches to a crossarm via a 1049 NU-RAIL fitting or CM220 mount. The crossarm is then mounted to a tripod or tower.
1049
 
The 7623 pipe mentioned above fits into this NU-RAIL crossover fitting. The fitting then attaches to one end of a CM202, CM204, or CM206 crossarm, and the crossarm mounts to a tripod or tower.
CM220
 
The GPS antenna can be mounted to a crossarm via the CM220 mount and a 7623 pipe.

Other Accessories

31182
 
The 31182 is a magnetic mount GPS patch antenna. It is typically used where GPS reception is readily available and concern is low for snow buildup completely covering the antenna. The 31182 is also commonly used in cost-sensitive applications or applications that require a small-sized, low-profile antenna. This antenna connects to a GPS receiver with SMA connector, such as that found in the TX320. The antenna package is waterproof and corrosion resistant.
31327
 
The 31327 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
COAX3NT-L
 
COAX3NT-L Antenna Cable LMR195 w/Type N Male & TNC Male Connectors
 
The COAX3NT-L is used to connect the 17992 GPS antenna to a 31326 or 31324 in-line GPS surge suppressor. The COAX3NT-L is an LMR195 coaxial cable fitted with a Type N Male plug connector on one end and a TNC Male plug connector on the other end.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Replacement Parts

7843
 
The 7843 is the 2-pin, power supply connector (green) supplied with the TX320. This detachable plug can be easily replaced by the user.
 
The 18133 power cable connects the TX320 transmitter to the power supply. The cable contains the 18889 inline fuse that's listed below.
18889
 
This 7.5 Ampere fast-blow fuse has blade connectors. The 18889 sits inside of the in-line fuse holder contained in the 18133 Power Cable (see above).
17648
 
The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A male connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.