SR50A-L
SR50A-L
 
SR50A-L CSC Sonic Ranging Sensor
 
SR50A-L Options - show details
-L Pricing is in ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Maximum cable length is 196.9 ft for the SDI-12 output, 98.4 ft for RS-232 output (9600 bps or less), and 984.3 ft for the RS-485 output.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-C -C w/ET/CS110 Connector
How to Order Shipping Information

Add to your Quote List


Product Details
Restockable Yes
Warranty 2 years SN 6610+
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) — Test Report
(1) SR50ACBL-L Replacement Cable for SR50A

Common Accessories

19517
19517 SR50A Mounting Kit
 
show details
This mounting kit can be used as an alternative to the 19484 mounting stem. The 19517 attaches directly to CM206 crossarm or a user-supplied horizontal pipe with a 1" to 1.75" OD.
19484
19484 SR50A Mounting Stem
 
show details
The 19484 mounting stem attaches to the sensor. The stem is then attached to the CM206 crossarm via a CM220 mount, 17953 NU-RAIL fitting, or CM230 Adjustable Inclination Mount.
17953
17953 1 x 1 inch Nurail Crossover Fitting
 
show details
The 17953 NU-RAIL Crossover Fitting can be used instead of the CM220 to attach the SR50A to a CM206 crossarm. The 19484 mounting stem is also required.
CM220
CM220 Right Angle Mounting Kit
 
show details
The CM220 Right-angle Mounting Bracket attaches this sensor to a CM206 crossarm. The 19484 mounting stem is also required.
CM230
CM230 Adjustable Angle Mounting Kit
 
show details
If the surface is at an angle, the CM230 Adjustable Inclination Mount can be used to position the SR50A so that it is perpendicular to the ground.
CM230XL
CM230XL Adjustable Angle Mounting Kit, Extended Length
 
show details
The CM230XL provides the same functionality as the CM230, but the CM230XL places the SR50A further from the pole or crossarm.

Other Accessories

33815
33815 SDI-12 Terminal Bus Kit
 
show details
The 33815 makes it easier for you to connect wires from multiple SDI-12 sensors into one set of terminals on a data logger. The 33815 uses six DIN-rail mountable (pn 27479) 6-wire terminal blocks. The 33815 jumpers two connectors together at a time (pn 32918). This setup allows up to 11 SDI-12 sensors to be connected to one set of terminals on a data logger.

Replacement Parts

SR50ACBL-L
SR50ACBL-L
 
SR50ACBL-L Replacement SR50A Cable
 
show details
This cable is available as a replacement item or as a "spare" cable. The SR50ACBL is fitted with a connector for attachment to the SR50A. On the other end, the cable terminates in pigtails for connection to the datalogger.
SR50ACBL-L Options - show details
-L Pricing is in ft per sensor cable

Allowed values: 1-1000 ft, increments of 1 ft

Maximum cable length is 200 ft for the SDI-12 output, 200 ft for RS-232 output, and 984 ft for the RS-485 output.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-C -C w/ET/CS110 Connector
19486
19486 SR50A or SR50AT Transducer Maintenance Kit
 
show details
The 19486 provides one replacement transducer with connector, an O-ring, six #4091 desiccant bags, and two #905 desiccant bags. The transducer can typically be replaced in the field by the customer (assumes reasonably favorable weather conditions).
905
905 Desiccant 1/2 Unit Bag
 
show details
Two bags of the 905 desiccant are used inside the electronics housing. The 905 desiccant is not replaced when the transducer is replaced.
4091
4091 Desiccant 1g Bag
 
show details
Six bags of the 4091 desiccant are used to dry the air in the area above the transducer. Six bags are included in the transducer replacement kit.

Services

30249 SR50A Transducer Replacement w/Bench & Chamber Test
 
show details
The 30249 is a service for the SR50A provided at the factory. All factory replacements require an RMA (Returned Material Authorization).