This product is no longer available and has been replaced by: SR50A-L.
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Other Accessories

The 1049 0.75" x 1.0" Slip-on Offset Crossover Fitting connects the circular shaft of the 6880 bracket to the circular shaft of the SR50.
This fitting can be used as an alternative to the CM220 for mounting the SR50 to a CM206 crossarm.
The CM220 is used to affix the SR50 to a CM206 crossarm.
If the surface is at an angle, the CM230 Adjustable Inclination Mount is used to position the SR50 so that it is perpendicular to the ground.

Replacement Parts

These replacement desiccant packs are used inside the SR50's electronics package. Two packs are used each time the desiccant is replaced.
These replacement desiccant packs are used inside the SR50's transducer. Two packs are used each time the desiccant is replaced.
SR50CBL-L Replacement SR50 Cable
This cable is available for replacement or as a "spare" cable. It connects the sensor (via a specialized connector) to the datalogger (pigtails).
Cable Length - show details
-L ft per sensor cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 25, 50, 75, or 100 ft length (8, 15, 23, 31 m). Maximum length is 200 ft (SDI-12) or 1000 ft (pulse).
The 10970 Transducer Kit is comprised of one replacement transducer with connector, an O-ring, 2 [#4091] desiccant packs, and 2 [#905] desiccant packs. The 10970 can typically be replaced in the field by a customer (assumes reasonably favorable weather conditions).


The 30249 is a service for the SR50 provided at the factory. All factory replacements require an RMA (Returned Material Authorization).