SR30-L
 
SR30-L Hukseflux ISO 9060 Secondary Standard Pyranometer w/RS-485 Modbus Communications & Integrated Heating & Ventilation
 
SR30-L Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) ISO 9060 Certificate of Calibration, Temperature Response Test Report, Directional Response Test Report, and Tilt Sensor Test Report
(1) Sun Screen from original mfg
(1) Hukseflux Sensor Manager Software on USB Flash Drive
(1) 34512 M6 x 25 mm Stainless-Steel Screw with 1 mm Thread Pitch and Hex Socket Head
(1) 31373 M6 18-8 Stainless-Steel External Tooth Lock Washer

Common Accessories

CM255
 
For each SR30, a mount is needed. Four mount options are available. The CM255 is one option. The CM255 is used for most applications that require mounting a solar sensor at adjustable angles. The CM255 is designed to work with masts, crossarms, or poles that are 1.0 to 1.5 in. OD. It is not designed for applications using a rotating shadowband radiometer (RSR).
CM256
 
CM256 Adjustable Plane & Angle Solar Mounting Stand
 
The CM256 adjustable-angle, adjustable-plane mounting stand further simplifies the accurate and precise mounting of a pyranometer, ventilation unit, shadowband radiometer, or reference cell. Several pyranometer mounting stands have been combined and simplified to make ordering easier and usability friendlier. The CM256 is a combination of the CM255LS pyranometer mount, CM245 reference cell and shadowband mount, 31394 VU01 mount, and 31153 CVF4 mount. In addition, several new sensors are now fully supported such as the SPN1, MS-80(M), SR30, SR05, and IMT reference cell CM325.
Mounting Plate Options - show details
-SP -SP w/Small Mount Plate
This mounting plate option is compatible with the following: MS-40/60/80, MS-40M/60M/80M, SR30, SR05, SR11, SR15, SR20-T2, SR20-D2, SP Lite 2, CMP3/6/10/11/21/22, SMP3/6/10/11/21/22, CGR3/4, and SGR3/4.
-LP -LP w/Large Mount Plate
This mounting plate option is compatible with the following: SPN1, PSP, GPP, SPP, and Si-01TC Reference Cell (CS325DM).
-VN -VN w/VU01 or MV-01 Plate
This mounting plate option is compatible with the following: VU01 and MV-01.
-CV -CV w/CVF4 Plate
This mounting plate option is compatible with the following: CVF4.
CM261
 
CM261 Single-Axis Tracker Mounting Stand
 
One CM261 is needed per CVF4-L. The CM261 single-axis tracker pyranometer mount with adjustable plane simplifies the mounting of any pyranometer, ventilation unit, reference cell, or SPN1 to hexagonal, round, and square single-axis torque tubes. The CM261 is a combination and simplification of the CM260 and CM265 to make ordering easier and usability friendlier. The bracket includes provisions for mounting the sensors and ventilation units at different heights, allowing the sensing element to be mounted at the same height as the solar modules.
Mounting Plate Options - show details
-SP -SP w/Small Mount Plate
This mounting plate option is compatible with the following: MS-40/60/80, MS-40M/60M/80M, SR30, SR05, SR11, SR15, SR20-T2, SR20-D2, SP Lite 2, CMP3/6/10/11/21/22, SMP3/6/10/11/21/22, CGR3/4, and SGR3/4.
-LP -LP w/Large Mount Plate
This mounting plate option is compatible with the following: SPN1, PSP, GPP, SPP, and Si-01TC Reference Cell (CS325DM).
-VN -VN w/VU01 or MV-01 Plate
This mounting plate option is compatible with the following: VU01 and MV-01.
-CV -CV w/CVF4 Plate
This mounting plate option is compatible with the following: CVF4.
Torque Tube Mounting - show details
-AT -AT for ATI Torque Tube
This torque tube mounting option is compatible with hexagonal torque tubes such as ATI.
-NT -NT for NexTracker T Tube
This torque tube mounting option is compatible with round torque tubes such as NexTracker.
-GT -GT for Generic T Tube
This torque tube mounting option is compatible with square torque tubes.
CMB200
 
The CMB200 may be used with a crossarm to provide additional stability when mounting on Campbell Scientific tripods and towers. This kit provides support for crossarms with heavier or sensitive sensor loads, as well as added stability in higher winds.

Other Accessories

33973
 
The 33973 is an RS-485 to USB converter.

Replacement Parts

 
SR30CBL-L SR30 Replacement Cable
 
The SR30CBL replacement cable uses pn 9720 cable, which is a two-twisted pair, 22 AWG cable with a Santoprene jacket. Insulation colors of the twisted pairs are red/black and green/white. An aluminum Mylar shield is grounded via a drain wire.
SR30CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
 
The 34512 is used to secure the pyranometer to an adjustable-angle solar sensor mounting stand.
 
The 31373 is commonly used with the 34512 screw to secure the pyranometer to the adjustable-angle solar sensor mounting stand.

Services

33475
 
The 33475 recalibration service is performed using an intermittent shade method with a World Radiometric Reference (WRR) traceable AHF cavity radiometer. The 33475 recalibration is ISO 17025 accredited to the following standards: ASTM G167 and ISO 9846.
33476
 
The 33476 recalibration service is performed using a reference group of pyranometers traceable to World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM E824 standard.
33477
 
The 33477 recalibration service is performed indoors using a reference pyranometer of the same make and model. Reference pyranometers are traceable to the World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM G207 standard.