SR11
 
SR11 Hukseflux First Class Pyranometer
 
Cable Length Options
-17 -17 w/17ft per Probe
-50 -50 w/50ft per Probe
-150 -150 w/150ft per Probe
-U -U w/User Defined Length
-U User Specified Length - show details
-L ft cable per probe

Allowed values: 1-328 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Restockable Yes
Warranty 4 years
Compliance
Ships With
(1) Sun screen from original mfg
(1) ISO 9847 WRR Traceable Calibration Certificate
(1) 2.5 mm hex key for use with sun screen from original mfg
(2) 7313 #10-32 x 1.00 Screw Hex Socket Cap
(2) 2143 #10 Lock Washer
(2) 6561 Stainless-Steel #10 x 11/16 Fender Washer

Common Accessories

CM256
 
CM256 Adjustable Plane & Angle Solar Mounting Stand
 
The CM256 is one of three options for the needed mounting kit. The CM256 adjustable-angle, adjustable-plane mounting stand further simplifies the accurate and precise mounting of a pyranometer, ventilation unit, shadowband radiometer, or reference cell. Several pyranometer mounting stands have been combined and simplified to make ordering easier and usability friendlier. The CM256 is a combination of the CM255LS pyranometer mount, CM245 reference cell and shadowband mount, 31394 VU01 mount, and 31153 CVF4 mount. In addition, several new sensors are now fully supported such as the SPN1, MS-80(M), SR30, SR05, and IMT reference cell CM325.
Mounting Plate Options - show details
-SP -SP w/Small Mount Plate
This mounting plate option is compatible with the following: MS-40/60/80, MS-40M/60M/80M, SR30, SR05, SR11, SR15, SR20-T2, SR20-D2, SP Lite 2, CMP3/6/10/11/21/22, SMP3/6/10/11/21/22, CGR3/4, and SGR3/4.
-LP -LP w/Large Mount Plate
This mounting plate option is compatible with the following: SPN1, PSP, GPP, SPP, and Si-01TC Reference Cell (CS325DM).
-VN -VN w/VU01 or MV-01 Plate
This mounting plate option is compatible with the following: VU01 and MV-01.
-CV -CV w/CVF4 Plate
This mounting plate option is compatible with the following: CVF4.
CM255
 
The CM255 is one of three options for the needed mounting kit. The CM255 is used for most applications that require mounting a solar sensor at adjustable angles.
CM261
 
CM261 Single-Axis Tracker Mounting Stand
 
The CM261 is one of three options for the needed mounting kit. The CM261 single-axis tracker pyranometer mount with adjustable plane simplifies the mounting of any pyranometer, ventilation unit, reference cell, or SPN1 to hexagonal, round, and square single-axis torque tubes. The CM261 is a combination and simplification of the CM260 and CM265 to make ordering easier and usability friendlier. The bracket includes provisions for mounting the sensors and ventilation units at different heights, allowing the sensing element to be mounted at the same height as the solar modules.
Mounting Plate Options - show details
-SP -SP w/Small Mount Plate
This mounting plate option is compatible with the following: MS-40/60/80, MS-40M/60M/80M, SR30, SR05, SR11, SR15, SR20-T2, SR20-D2, SP Lite 2, CMP3/6/10/11/21/22, SMP3/6/10/11/21/22, CGR3/4, and SGR3/4.
-LP -LP w/Large Mount Plate
This mounting plate option is compatible with the following: SPN1, PSP, GPP, SPP, and Si-01TC Reference Cell (CS325DM).
-VN -VN w/VU01 or MV-01 Plate
This mounting plate option is compatible with the following: VU01 and MV-01.
-CV -CV w/CVF4 Plate
This mounting plate option is compatible with the following: CVF4.
Torque Tube Mounting - show details
-AT -AT for ATI Torque Tube
This torque tube mounting option is compatible with hexagonal torque tubes such as ATI.
-NT -NT for NexTracker T Tube
This torque tube mounting option is compatible with round torque tubes such as NexTracker.
-GT -GT for Generic T Tube
This torque tube mounting option is compatible with square torque tubes.

Replacement Parts

 
Two of these screws are shipped with the SR11 pyranometer. The 7313 may be purchased to replace a lost or damaged screw.
2143
 
Two of these washers are shipped with the SR11 pyranometer. The 2143 may be purchased to replace a lost or damaged washer.
 
Two of these washers are shipped with the SR11 pyranometer. The 6561 may be purchased to replace a lost or damaged washer.

Services

33476
 
The 33476 recalibration service is performed using a reference group of pyranometers traceable to World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM E824 standard.
33477
 
The 33477 recalibration service is performed indoors using a reference pyranometer of the same make and model. Reference pyranometers are traceable to the World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM G207 standard.