SN500SS
 
SN500SS Apogee Net Radiometer
 
Cable Length Options
-10 -10 w/10ft per sensor
-17 -17 w/17ft per sensor
-33 -33 w/33ft per sensor
-50 -50 w/50ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per sensor

Allowed values: 0-200 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 4 years
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) Mounting Pole from original mfg
(1) Carrying Case from original mfg

Common Accessories

32295
 
One 32295 mounting kit is needed per SN500SS sensor. The 32295 was designed to fit the mounting rod that comes with the net radiometer. The mounting bracket can be mounted to a mast or pipe.

Other Accessories

33815
 
The 33815 makes it easier for you to connect wires from multiple SDI-12 sensors into one set of terminals on a data logger. The 33815 uses six DIN-rail mountable (pn 27479) 6-wire terminal blocks. The 33815 jumpers two connectors together at a time (pn 32918). This setup allows up to 11 SDI-12 sensors to be connected to one set of terminals on a data logger.

Replacement Parts

SN500SSCBL
 
SN500SSCBL SN500SS Replacement Cable
 
The SN500SSCBL is easily replaced by the user. It consist of 26 AWG conductors insulated in polypropylene in a shielded four-connector configuration with a drain wire; the cable jacket is composed of black thermoplastic rubber (TPR). The SN500SSCBL has a six-pin weatherproof connector that quickly attaches to the SN500SS. The cable can be terminated with tinned wires or a prewired connector.
Cable Length Options
-10 -10 w/10ft per cable
-17 -17 w/17ft per cable
-33 -33 w/33ft per cable
-50 -50 w/50ft per cable
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft per cable

Allowed values: 1-200 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Services

The SN500SS can be recalibrated by sending it to Campbell Scientific, Inc. It is recommended that the sensor be recalibrated once every two years.