RETIRED ›
This product is no longer available.
RAWS-F
 
RAWS-F Remote Automated Weather Station, Fire Weather
 
Calibration Certificate - show details
-NC -NC No Calibration Cert
The RAWS-F is shipped without a calibration certificate.
-CC -CC CR1000M Calib Cert
If specified, the RAWS-F is shipped with a two-page calibration certificate.
Communication Options - show details
-NM -NM No Communications
Select this option for a user-supplied communication method.
Rechargeable Batteries - show details
-24 -24 24Ah w/Solar Panel
This power supply includes a 24-Ahr sealed rechargeable battery, an external 20-W solar panel, and a CH150 regulator.
Wind Sensor Options - show details
-MW -MW Met One 034B-QD Wind
The 034B Windset combines a 3-cup anemometer and vane into a single integrated package. The 034B is constructed of lightweight aluminum and is designed for continuous long-term operation.
-GW -GW Gill WINDSONIC4-QD
The WindSonic is a two dimensional ultrasonic anemometer for measuring wind speed and direction. It does not have moving parts, which minimizes routine maintenance.
Barometer Sensor Option - show details
-NB -NB No Barometer
Select this option if you already have a RAWS-F compatible barometer or if you don't choose to have a barometer in your system.
-QB -QB CS100-QD Barometer
The CS100 Barometer uses Setra's Setraceram capacitive sensor and IC analog circuit to measure barometric pressure over a 600 to 1100 millibar range.
Transport Case Options - show details
-NT -NT No Transport Cases
Select this option if you wish to fabricate custom transport cases for your RAWS-F station.
-MC -MC Cases & Met One foam
This option provides two transport cases and a foam cutout customized for the Met One wind sensor.
-WC -WC Cases &WindSonic foam
The -WC option provides two transport cases and a foam cutout customized for the WindSonic4 wind sensor.
Product Details
Typically Ships Within 45 - 52 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

 
The CR1000M inside of the RAWS-F may be temperature tested for the -55° to +85°C range. For this temperature range, analog accuracies are derated approximately two times over published specifications.
CS516-QD
 
The CS516-QD consists of a CS506 Fuel Moisture Probe, a 26601 10-hour Fuel Moisture Stick, a CS205 Fuel Temperature Stick, and a 107 Thermistor mounted on a 26817 Mounting Stake. The cables on the CS506 and 107 probes terminate in a military style connector instead of pigtails. The connector attaches to the RAWS-F Fire Weather Quick Deployment Station.
18897
 
The 18897 wall charger can recharge the RAWS-F battery during off-season, winter-time storage. It outputs 24 Vdc @ 1.67 A and accepts 100 to 240 Vac.

Replacement Parts

18411
 
The 18411 provides color-coded, keyed connectors for attaching the sensors. It may be purchased to replace a damaged connector panel.
 
The 18928 is the 7-Ahr sealed rechargeable battery that comes with the -7 Rechargeable Battery Option. This battery is available as a replacement item.
10075
 
The 10075 is the 12-Ahr sealed rechargeable battery that comes with the -24 Rechargeable Battery Option. This battery is available as a replacement item.
SP20-QD
 
The SP20-QD is the 20-W solar panel that comes with the -24 rechargeable battery option. This solar panel may be purchased as a replacement item. The solar panel's cable terminates in a military-style connector that attaches to the RAWS-F connector panel. Cable length is 3 feet.
CR1000M
 
CR1000M Measurement & Control Module w/o Wiring Panel
 
The CR1000M may be purchased to replace the module originally contained in the RAWS-F. The CR1000M provides sensor measurement, timekeeping, data reduction, data/program storage and control functions. It has 4 MB of memory for data and program storage.
Temperature Ranges - show details
-ST -ST -25 to +50C
Every CR1000M is tested and guaranteed to perform within published specifications over the standard temperature range. Units are tested and shipped to standard operating range unless extended testing is specified.
-XT -XT -55 to +85C
For extended temperature range testing, analog accuracies are derated approximately two times over published specifications. Extended testing covers the -55° to +85°C range. Batteries are not temperature tested.
Warranty Lengths - show details
-SW -SW Standard 3yr Warranty
At the time of purchase, the CR1000M includes a standard warranty of 36 months. See our full warranty policy in the CR1000 manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our Extended Warranty adds 48 months to the standard 36 month warranty, bringing the total warranty period to 84 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.
Calibration Certificate - show details
-NC -NC No Calibration Cert
The CR1000M is shipped without a calibration certificate.
-CC -CC Calibration Cert
If specified, the CR1000M is shipped with a two-page calibration certificate.
10873
 
The 10873 is a 6-ft cable that terminates in a 9-pin female connector on one end and a 9-pin male connector on the other end. The female connector attaches to the RS-232 port on a PC, and the male connector attaches to the RAWS-F connector panel.
 
The 6650 consists of a 36-in. ground wire and lug connector. It may be purchased to replace a ground wire and lug connector that has been lost or damaged.
2207
 
Five of these 4-inch cable ties are included with the RAWS-F. The cable ties have a flexible, nylon construction, and are available as a replacement item.
 
One foot of this 4-gauge copper wire is included with the RAWS-F. The 2833 connects the ground lug to the ground rod.
5449
 
The 5449 may be purchased to replace the ground lug originally attached to the RAWS-F enclosure. This ground lug is required to properly ground the RAWS-F.
18744
 
One plug that covers a 1.38" to 1.75" diameter hole is included with the RAWS-F. The 18744 may be purchased to replace a lost or damaged plug.
18377
 
One plug that covers a 0.45" to 0.81" diameter hole is included with the RAWS-F. The 18377 may be purchased to replace a lost or damaged plug.
5252
 
Four of these dust caps are included with the RAWS-F. They cover the WS/WD, FM/FT, TEMP/RH, and SOLAR RAD sensor connectors. The 5252 may be purchased to replace a lost or damaged dust cap.
5010
 
Three of these dust caps are included with the RAWS-F. They cover the PRECIP, SDI-12, and BATT CHARGER/SOLAR PANEL connectors. The 5010 may be purchased to replace a lost or damaged dust cap.
18397
 
This dust cap covers the GPS Antenna connector on the RAWS-F connector panel. The 18397 may be purchased to replace a lost or damaged dust cap.
18396
 
Two of these dust caps are included with the RAWS-F. They cover the RF OUTPUT and GOES ANTENNA connectors. The 18396 may be purchased to replace a lost or damaged dust cap.
18815
 
Five 11" Hook and Loop Cable Ties are included with the RAWS-F. The 18815 is available as a replacement items.
1013
 
This clamp attaches the lightning rod onto our tripods and towers. The 1013 is shipped with our tripods and towers, and it may be purchased to replace a lost or damaged clamp.
16770
 
The 16770 provides equipment for installation of a RAWS-F station to the correct 3-axis vertical orientation and to align the station to the magnetic North.
17049
 
The 17049 may be purchased to replace a lost or damaged spike.
6186
 
This two-conductor cable has a two-pin connector on one end that attaches to the power supply, and pigtails on the other end that attach to the battery. The cable is 10 ft long.
7363
 
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
7364
 
The kit includes 12 Tefzel® 8 in. cable ties (pn 7362) that are resistant to gamma radiation, UV radiation, and chemicals.
1113
 
The 1113 is used to attach sensor leads to screw terminals.