Product Details
Restockable Yes
Warranty 1 year
Compliance

Common Accessories

21847
 
Either this cable or the COAXSMA-L (see below) is typically used to connect the 20679 antenna with a RavenXT-series digital cellular modem. The 21847 has a 12-foot length. It consists of an LMR195 coaxial cable that terminates in a type N male connector on the "antenna end" and an SMA connector on the "transceiver end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable (see Other Accessories).
COAXSMA-L
 
COAXSMA-L Antenna Cable LMR195 w/SMA & Type N Male Connector
 
Either this cable or the 21847 (see above) is typically used to connect the 20679 antenna with a RavenXT-series digital cellular modem. The COAXSMA-L is offered for customers who want a user-specified lead length; a maximum length of 20 ft (6 m) is recommended. The COAXSMA consists of an LMR195 coaxial cable that terminates in a type N male connector on the "antenna end" and an SMA connector on the "transceiver end." If surge suppression or lengths longer than 20 feet are required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable (see Other Accessories).
Cable Length - show details
-L ~Qft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft


Other Accessories

COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
The COAXNTN-L is a low-loss RG8 coaxial cable that requires the 31317 surge proteciton kit to connect it to a RavenXT-series modem. The COAXNTN-L/31317 combination is recommended over the COAXSMA or 21847 when the RavenXT-series modem is used in an environment susceptible to lightning or electrostatic buildup, or when the antenna cable must be longer than 20 feet. Please note that cable lengths longer than 20 feet should be avoided because the signal strength will be weakened.
Cable Length - show details
-L ~Qft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

31317
 
The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.