Product Details
Typically Ships Within 0 - 7 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 2830 Grounding Rod Clamp 1/2-1
(1) 6290 #1 Phillips Screwdriver
(1) 8125 Flat-Bladed Screwdriver, 2.5 mm Blade x 50 mm Shaft
(4) 2207 4 in. Nylon Cable Tie
(1) 2832 Copper-Clad Grounding Rod
(2) 4905 Desiccant 4-Unit Bag
(1) 10584 Anchor Bolt Template for ET Station Pole
(1) 850 Tripod or Tower Lightning Rod
(1) 5427 Screw 1/4-20 x .750 Cap Hex
(1) 10613 1-3/4 White Flip-Top Plastic Cap Grommet
(1) 10754 Gray PVC Coupling, 90 Degree Elbow, 18 in. Radius
(1) 12183 Screw 5/8-11 x 12 Stainless-Steel J-Bolt Anchor Kit with Nuts (set of 3)
(1) 12218 2-Conductor Ground Lug 1/0-#14
(1) 17589 Lightning Rod Clamp Assembly
(1) 2833 4 AWG THHN INS Copper Stranded Wire
(1) 4335 10 AWG Green Copper Stranded Wire

Replacement Parts

2207
 
Six of these 4 in. cable ties are included with the 10581 ET Shipping Kit.
4335
 
This 10-gauge copper wire is a component of 10581 ET Shipping Kit. It provides a ground lug-to-ET107 ground connection. No hardware is included.
12183
 
The 12183 is used to anchor an ET107 or ET106 station to a concrete pad. This j-bolt anchor kit is shipped with the 10581 ET Shipping Kit, and it is available as a replacement item.
 
The 850 may be ordered to replace a lost or damaged lightning rod.
8125
 
The 8125 is a small, flat-bladed screwdriver that is extremely useful for opening the guillotine terminals on our dataloggers and measurement control devices. The blade is 2.5 mm across, and the untapered shaft length is 50 mm. The handle has an approximate length of 9 cm, and it features a rotating end-cap that makes the screwdriver easy to rotate.
 
This clamp attaches a grounding rod onto the tripod, tower, or ET pole. The 2830 may be purchased to replace a lost or damaged clamp.
6290
 
The 6290 Phillips head screwdriver is commonly used to drive 505 screws into 6044 grommets, which are in turn seated into the square holes on the backplates of our enclosures. This screwdriver is included with the enclosure supply kit as well as other products.
12218
 
This ground lug is included with the 10581 ET Shipping Kit. The 12218 is one of many components used to ground the station. Properly grounding the station helps protect the equipment from lightning. The 12218 may be purchased to replace a lost or damaged ground lug.
10584
 
The 10584 is the anchor-bolt template shipped with the 10581 ET Shipping Kit. Use of this template helps ensure proper positioning of the anchor bolts before the station is installed. The 10584 may be purchased to replace a lost or damaged template.
4905
 
The 4905 Single 4-Unit Silica Desiccant Pack is packaged in Tyvek. It will periodically need to be replaced.
 
This 4 AWG copper wire typically connects a ground lug to a ground rod. Five feet of the 2833 is included in the 10581 ET shipping kit. The price shown is a per foot cost.
10754
 
This coupling is a component of the 10581 ET Shipping Kit. The 10754 may be purchased to replace a lost or damaged coupling.
 
The 2832 5-ft grounding rod may be purchased to replace a lost or damaged grounding rod. Properly grounding a tripod or tower helps protect the equipment from lightning.
 
The 17589 provides the clamp and hardware used to attach a lightning rod onto an ET107 or ET106 Station. This assembly is included with the 10581 ET Shipping Kit, and is available as a replacement item.
5427
 
This screw is included with the 10581 ET Shipping Kit. The 5427 may be purchased to replace a lost or damaged screw.
10613
 
This grommet is a component of the 10581 ET Shipping Kit. The 10613 may be purchased to replace a lost or damaged grommet.