RETIRED ›
This product is no longer available and has been replaced by: NL201.
NL200
 
NL200 Network Link Interface
 
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

One of the power supplies listed above is required to power the NL200.

Other Accessories

15966
 
The 15966 is often used when the NL200 is in an office next to a computer. It is an ac/dc transformer that accepts inputs from 90 to 260 Vac @ 47 to 63 Hz, and then outputs 12 Vdc @ 880 mA. The 15966 is fitted with a cable and barrel plug to connect the transformer to the NL200; cable length is 6 ft.
14291
 
The 14291 is a field power cable that allows the NL200 to be powered from a suitable 12 Vdc battery. It terminates in a barrel plug on one end for connection to the NL200 and two pigtails for connection to the 12V and GND terminals on a power supply. The cable has a 2 foot length.
28901
 
The 28901 is similar to the 28900 cable but has a 50 ft length. This cable should be used when the distance between the hub and NL200 is 10 to 50 ft.
14020
 
The 14020 Field Power Cable has a barrel connector for the NL200 and a 9-pin connector for the datalogger's CS I/O port. This cable allows the datalogger's power supply to be used.
10873
 
The 10873 is a DB9-female-to-DB9-male cable that connects the NL200 to the datalogger’s RS-232 port. The cable is six feet long.
CAT5UCBL-L
 
CAT5UCBL-L CAT5e Cable Unshielded w/RJ-45 Connectors
 
The CAT5UCBL is similar to the 28900 cable but is ordered to a user-defined length.
Cable Length - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

28900
 
The 28900 is an unshielded CAT5 Ethernet cable used when the cable is run from a hub to the NL200. Cable length is 10 ft.
28033
 
The 28033 Ethernet Surge Protector helps protect the NL200 from electrical surges. A straight-through Ethernet cable is required to connect the 28033 to the NL200. Another Ethernet cable is used to connect the 28033 to the computer or hub.
28898
 
The 28898 is similar to the 28900 cable but has a 6 in. length. This cable can be used when the distance between the hub and NL200 is less than 6 inches.
28899
 
The 28898 is similar to the 28899 cable but has a2 ft length. This cable can be used less than 2 ft.

Replacement Parts

27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.