RETIRED ›
This product is no longer available and has been replaced by: NL201. Some accessories, replacement parts, or services may still be available.
NL100
 
NL100 Network Link Interface
 

Other Accessories

18148
 
This Ethernet crossover cable is similar to the 13659 cable, except it has a 25 foot length. Ethernet crossover cables are recommended when the cable is run directly from the computer to the NL100 Ethernet port.
10873
 
The 10873 connects the NL100 to the datalogger's RS-232 port. This cable has a 6-ft length.
13657
 
This DB9 null modem cable is required to configure the NL100 from a PC's RS-232 port. The 13657 has a 6-ft length.
28900
 
This 10baseT Ethernet straight through cable is used when the cable is run from a hub to the NL100.
13659
 
This 10baseT Ethernet crossover cable is required to configure the NL100 directly from a PC's Ethernet port. The 13659 has a 7-ft length.
28033
 
The 28033 Ethernet Surge Protector helps protect the NL100 from electrical surges. A straight-through Ethernet cable is required to connect the 28033 to the NL100. Another Ethernet cable is used to connect the 28033 to the computer or hub. Typically either the 25504 1 ft Ethernet cable or the 25449 3 ft Ethernet cable is used with this device.
28898
 
The 28898 is a 6 in., unshielded, CAT5e cable with RJ45 connectors that can be used with the 28033.
28899
 
The 28899 is a 2 ft RJ-45 to RJ-45 cable that can be used with the 28033.

Replacement Parts

 
The 7845 is a green RS-485 connector. Two 7845 connectors are attached to every NL100 that leaves the factory.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.