HygroVUE10
 
HygroVUE10 CSL Digital Temperature /RH Sensor, w/M12 Connector
 
Cable Length Options
-10 -10 w/10ft per sensor
-17 -17 w/17ft per sensor
-33 -33 w/33ft per sensor
-50 -50 w/50ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
-L ~Qft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

Common Accessories

RAD10E
 
When exposed to sunlight, the HygroVUE™10 must be housed in a radiation shield. One RAD10E is needed per sensor. The RAD10E is attached to a Campbell Scientific crossarm or mast. The RAD10E uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. This shield also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2 m s-1 (~4.5 mph)), giving a better measurement.

Other Accessories

33815
 
The 33815 makes it easier for you to connect wires from multiple SDI-12 sensors into one set of terminals on a data logger. The 33815 uses six DIN-rail mountable (pn 27479) 6-wire terminal blocks. The 33815 jumpers two connectors together at a time (pn 32918). This setup allows up to 11 SDI-12 sensors to be connected to one set of terminals on a data logger.

Replacement Parts

35219
 
The 35219 replaces the sensor element, filter, and cap of a HygroVUE™10. Replacement can take place in the field—eliminating downtime.
HygroVUE10CBL
 
HygroVUE10CBL HygroVUE10 Replacement Cable
 
The HygroVUE10CBL (pn 35218) is a replacement cable for the HygroVUE™10 Digital Temperature and Relative Humidity Sensor and may be purchased to replace a damaged cable.
Cable Length Options
-10 -10 w/10ft per cable
-17 -17 w/17ft per cable
-33 -33 w/33ft per cable
-50 -50 w/50ft per cable
-U -U w/User Defined Length
-U User Specified Length - show details
-L ~Qft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Services

This sensor cannot be calibrated. Instead, the temperature/RH element and cap are replaced as needed. Campbell Scientific can perform this basic repair work on the sensor, including replacement of the cables. Repair estimates can be provided upon request.