RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.

Common Accessories

41003-5
 
The 41003-5 provides a 10-plate naturally-aspirated radiation shield that houses one HC2S3 probe. Its louvered construction allows air to pass freely through the shield thereby keeping the probe at or near ambient temperature. The 41003-5 attaches to a crossarm, mast, or user-supplied pipe with a 1.0" to 2.1" OD.
RAD10
 
The RAD10 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
27755
 
The 27755 is a Teflon Filter with smaller pore size (10 micron) that provides good protection against fine dust particles and salt (marine environments), but with slightly slower response than for the polyethylene filter.

Replacement Parts

27730
 
The 27730 is a replacement polyethylene filter.
 
The 27728 is a replacement sensor head for the HC2S3-QD. Replacement can be done in the field—eliminating downtime.
 
The 27731 hex plug is required to mount the HC2S3 temperature and relative humidity sensor in the 41003-5 10-plate radiation shield.