Product Details
Typically Ships Within 0 - 7 Days
Restockable Yes
Warranty 1 year

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 13770 TDR200/100 and SDM8X50/SDMX50 Interconnect Cable, 18 in.
(1) 13776 2 Cables, TDR100 or SDMX50 to Datalogger
(1) 13777 TDR100 Grounding Kit
(21) 505 Screw #6-32 x .375 Pan Phillips
(12) 4366 Stainless-Steel Lock Washer 5/16
(1) 30066 Battery Terminal Bus Kit (quantity of 2)
(21) 6044 Grommet for #6 or 8 Screw
(1) 7363 Enclosure Supply Kit, Standard Size
(2) 17492 Stainless-Steel U-Bolt Screw 5/16-18 x 2.125 with 2 Silicon Bronze Nuts
(4) 17446 Stainless-Steel U-Bolt Screw 5/16-18 x 1.500 with Silicon Bronze Nuts
(12) 4365 Stainless-Steel Flat Washer 5/16

Common Accessories

The desiccant holder secures desiccant to the enclosure lid.
The 28701 is bolted to the enclosure door. It contains a zipped bag for desiccant and an open pocket for documents.
The CS210 senses relative humidity levels inside the environmental enclosure for the purpose of scheduling desiccant exchange.
The 6714 includes twenty 4-unit Silica Gel Desiccant Bags.
The 18165 Enclosure Door Switch is a small accessory that can be used to monitor when the door of the enclosure is open.

Replacement Parts

This 36 in.ground wire and lug connector can be purchased to replace a ground wire and lug connector that has been lost or damaged.
The 14252 SDM connector mates to the connector on the ENCTDR100. The 14252 consists of five screw terminals encased in D-subminature shell. The terminals connect to the 12V, GND, C1, C2, and C3 terminals on the ENCTDR100.
This 18 in. long, 50 ohm, RG58 coaxial cable is fitted with BNC male connectors on both ends. It connects the TDR100 to the Level 1 SDM8X50/SDMX50 in a TDR system.
The 13777 Grounding Kit is shipped with the ENCTDR100, and it is also available as a replacement item. This kit includes a piece of 10 AWG wire for connecting the datalogger and SDMX50SP to the enclosure ground lug.
The 17446 provides a U-bolt and two nuts as a replacement for the original U-bolt and nuts.
The 17492 provides a 5/16" U-bolt and two nuts. This product is used to mount solar panels, mounts, enclosures, or sensors to a mast, tower, or pole.
The 30066 consists of two battery-terminal bus stuffed circuit boards, plus an instruction sheet for using them on a large external battery.
The 4365 can be purchased to replace a lost or damaged washer.
The 4366 may be purchased to replace a lost or damaged washer.
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
The 13776 provides a 15 in. cable and a 12 in. cable. Also included is a 14252 SDM connector, which consists of five screw terminals and a D-subminiature connector.