This product is no longer available.
Product Details
Restockable Yes

Replacement Parts

The 6650 consists of a 3-foot ground wire and lug connector. It is available as a replacement part.
The 6616 is the green, 3-pin, SDI-12 connector on the SAT HDR GOES transmitter. It accommodates wire sizes from 12 to 24 awg.
This card provides a water vapor sensitive patch that adheres to the inside wall of the enclosure. Patches on the card change color as humidity thresholds are reached providing a visual indication of the enclosure's internal humidity.
The 15877 is used with the ENCSAT enclosure, and although the ENCSAT is retired, the 15877 remains available as a replacement part. The 15877 provides an RG8/U low-loss coaxial antenna cable with a 15-inch (38 cm) length. On each end, the cable terminates with Type N male connectors.
The 4905 Single 4-Unit Silica Desiccant Bag is packaged in Tyvek. The supplied desiccant should fill the initial needs of most applications, but should be periodically replaced.
This type T, 5 in. thermocouple is attached to a differential channel on several of our datalogger wiring panels when the datalogger is shipped. A 3315 may be ordered to replace a thermocouple that has become lost or damaged.
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
The 34040 connects a PS150, PS200, CH150, CH200, or CH201 power supply to an auxiliary, 12 V flooded battery such as a deep-cycle marine or RV battery. This is helpful when the battery is not in the same enclosure as the charge regulator/controller. The cable length is 3.048 m (10 ft). This two-conductor cable has a two-pin connector on one end that attaches to the power supply, and pigtails on the other end that attach to the battery.