CS700H-L
 
CS700H-L HS TB3H Heated Rain Gage 0.01 inch (0.254mm) Tip w/8 inch Orifice
 
Cable Lengths - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

-LP ft per power cable

Allowed values: 0-1000 ft, increments of 1 ft

Power Options
-DC -DC DC Powered Only
-AC -AC 110VAC Power Source

Add to your Quote List


Product Details
Typically Ships Within 60 - 67 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

CM240
 
The CM240 base helps level the CS700H—ensuring more accurate measurements. The base attaches to a CM300-series mounting pole or to a user-supplied 1.5 IPS (1.9" OD) pipe. The pipe should be long enough to place the gage's orifice one meter above the ground.
260-953
 
This wind screen consists of 32 leaves that hang freely and swing as the wind moves past them. The 260-953 helps minimize the affect of wind on the rain measurements.
CM300
 
CM300 23 inch Mounting Pole w/Cap
 
The CM300 provides a 23-in. long pole for mounting the CM240 Leveling Base. This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position. Each j-bolt includes nuts and washers.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
CM305
 
CM305 47 inch Mounting Pole w/Cap
 
The CM305 provides a 47-in. long pole for mounting the CM240 Leveling Base. This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
CM310
 
CM310 56 inch Mounting Pole w/Cap
 
The CM310 provides a 56-in. long pole for mounting the CM240 Leveling Base. This pole can be embedded directly into a concrete foundation or used with a pedestal kit. Campbell Scientific offers a j-bolt pedestal kit for permanent installations; a short leg kit for many temporary installations and many situations where it is impractical to use a concrete foundation; and a long leg kit for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds.
Pedestal Options - show details
-NP -NP No Pedestal Base
Select this if you are embedding the pole directly in a concrete foundation or supplying your own method for supporting the pole.
-PJ -PJ Pedestal J-Bolt Kit
Select this option to attach the pole onto a concrete foundation using j-bolts. With this kit, customers can more easily control the pole's placement ensuring that the pole remains in a vertical position.
-PS -PS Pedestal Short Legs
Pedestal Short Leg Kit includes three 23-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.
-PL -PL Pedestal Long Legs
The long leg option includes three 39-inch legs, three metal feet, and a pedestal base. Feet can be secured to the ground via the 17049 Grounding Spikes (see Other Accessories). The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof) or for areas that experience high wind speeds. With this option, Campbell Scientific assembles the leg kit to the mounting pole before it is shipped to you.

Replacement Parts

 
The 27315 is the power supply provided with the CS700H when the -AC option is chosen. It can be purchased separately to replace a power supply. Customers may also purchase this power supply if they originally chose the -DC option and later decided they needed to use ac power.