CS475A-L
 
CS475A-L Radar Water Level Sensor, 114.8ft Max Distance (-40 to +80C)
 
CS475A-L Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Restockable Yes
Warranty 2 years
Compliance CE Compliance Image RoHS Compliance Image

Common Accessories

25619
 
This bubble level helps users align the radar sensor in a vertical position. Accurate measurements require vertical alignment of the sensor.
25616
 
The 25616 is a display module. It allows the user to change settings, test the sensor, and view diagnostic information. The 25654 Cap with Window is available for this display.
25654
 
The 25654 is only needed if the 25616 is being used. The 25654 provides a cap for the 25616 Adjustment Display Module. The cap contains a window.
 
The 27561 ground wire is used between the CS475A sensor and the system ground connection.

Other Accessories

27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
33815
 
The 33815 makes it easier for you to connect wires from multiple SDI-12 sensors into one set of terminals on a data logger. The 33815 uses six DIN-rail mountable (pn 27479) 6-wire terminal blocks. The 33815 jumpers two connectors together at a time (pn 32918). This setup allows up to 11 SDI-12 sensors to be connected to one set of terminals on a data logger.