RETIRED › This product is no longer available and has been replaced by: CS456. Some accessories, replacement parts, or services may still be available.
The 25431 Split Mesh Cable grip is recommended for use in wells to center the cable and to provide a method of suspending the cable, reducing cable stretch.
The transducer's cable incorporates a vent tube that terminates inside of the 25366 desiccant tube. The 25366 is offered as a common accessory for customers who want a spare desiccant tube.
The A150 desiccated case is a small, self-contained junction box that allows the CS455 to be connected to a PWENC connector or a CWS900 wireless sensor connector.
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW
-PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS
-CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
The 25366 may be purchased to replace a damaged desiccant tube. The CS455 is shipped with this small desiccant tube attached to it. The transducer's cable includes a vent tube that terminates inside of the 25366. The desiccant tube prevents water vapor from entering the inner cavity of the transducer.
The 25425 requires an RMA (Returned Material Authorization) from Campbell Scientific. When it is ordered, we will recalibrate the CS455 to meet original specifications. Before and after calibration sheets are supplied with the pressure transducer.