CR9032
 
CR9032 CR9000X CPU Module
 
Temperature Ranges - show details
-ST -ST -25 to +50C
Every CR9032 is tested and guaranteed to perform within published specifications over the standard temperature range. Units are tested and shipped to standard operating range unless extended testing is specified. Batteries are not temperature tested.
-XT -XT -40 to +70C
For extended temperature range testing, analog accuracies are derated approximately two times over published specifications. Extended testing covers the -40‚° to +70‚°C range. Batteries are not temperature tested. Previously appeared on CR9032 orders as the XT-CR9032.
Warranty Lengths - show details
-SW -SW Standard 3yr Warranty
At the time of purchase, the CR9032 includes a standard warranty of 36 months. See our full warranty policy in the CR9000X manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our Extended Warranty adds 48 months to the standard 36 month warranty, bringing the total warranty period to 84 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.

Add to your Quote List


Product Details
Typically Ships Within 60 - 67 Days
Restockable Yes
Warranty 3 years
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(2) 17397 CR9000X upgrade label
(1) 10873 Serial Data Cable, 9-Pin Female to 9-Pin Male

Common Accessories

RTDAQ
 
RTDAQ Real-Time Data Acquisition Software
 
Need at least 1 copy.
Delivery Method
-D -D Download Only
-DD -DD Download & CD Disc
RTDAQ/U
 
RTDAQ/U Upgrade to Current Version
 
Delivery Method
-D -D Download Only
-DD -DD Download & CD Disc
28900
 
This 10baseT Ethernet straight through cable can be used when the cable will be run from a hub to the CR9000X. The 28900 has a 10 ft length.
28901
 
The 28901 is similar to the 28900 cable but has a 50 ft length. This cable is typically used when the distance between the hub and datalogger is 10 to 50 ft.
CAT5UCBL-L
 
CAT5UCBL-L CAT5e Cable Unshielded w/RJ-45 Connectors
 
The CAT5UCBL is similar to the 28900 cable but is ordered to a user-defined length.
Cable Length - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

13659
 
The 13659 10baseT Ethernet Crossover Cable is required to configure the CR9032 directly from a PC's Ethernet port. It has a 7 ft length.
8125
 
The 8125 is extremely useful for opening the guillotine terminals on this module. The blade is 2.5 mm across and the untapered shaft length is 50 mm. The handle has an approximate length of 9 cm, and features a rotating end-cap that makes the screwdriver easy to rotate.

Other Accessories

17752
 
The 17752 Reader/Writer allows a computer's USB port to read the data stored on CF card.
CF1
 
The CF1 adapter allows the PC-card slot in the CR9032 to read a CompactFlash® (CF) card. Only industrial-grade CF cards with a storage capacity of 2 GB or less should be used with our products.
CFMC256M
 
The CFMC256M is an industrial-grade CompactFlash card with a 256 MB storage capacity. The card is formatted as FAT32.
CFMC2G
 
The CFMC2G is an industrial-grade CompactFlash card with a 2 GB storage capacity. The card is formatted as FAT32.

Replacement Parts

10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. The cable is six feet long.