RETIRED ›
This product is no longer available and has been replaced by: CR300,CR310. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 0 - 7 Days
Restockable No
Warranty 3 years
Compliance RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

15725
 
One of these CDs should be included with each order. The 15725 provides a CD containing the current OS and compilers. This software is also available on our website for download.
17394
 
One end of the 17394 cable attaches to a USB port on a computer, and the other end of the cable attaches to the data logger's RS-232 port.
BP7
 
This sealed rechargeable battery for the CR211X has a 7 A h rating. The BP7does not fit in the ENC200.
15988
 
The 15988 transformer recharges the BP7 12 Vdc, 7 A h battery via ac power. Its cable terminates in pigtails for attachment to the data logger's terminal strip.
14201
 
Six antenna choices are offered. The 14201 is a high-gain (9 dBd), directional (Yagi) antenna suitable for outdoor use. It has a narrow beam width, so precise aiming is mandatory. The 14201 is useful for longer distances and when communicating only with one other station (due to narrow beam width). The antenna has a TYPE N female connector and requires an antenna cable to connect it to the CR211X.
14221
 
Six antenna choices are offered. The 14221 has the highest gain (3 dBd) of our omnidirectional antennas. It has a TYPE N female connector and requires an antenna cable to connect it to the CR211X.
14204
 
Six antenna choices are offered. The 14204 is a unity gain (0 dBd)omnidirectional antenna. This antenna must reside inside a building or enclosure. It's right angle knuckle joint can be oriented vertically or at right angles. The 14204 attaches directly to the CR211X (antenna cable not required).
15731
 
Six antenna choices are offered. The 15731 is a unity gain (0 dBd), straight, omnidirectional antenna that attaches directly to the CR211X (antenna cable not required). This antenna must reside inside of a building or enclosure.
15730
 
Six antennas are offered. The 15730 is a unity gain (0 dBd), right angle, omnidirectional antenna that attaches directly to the CR211X (antenna cable not required). This antenna must reside inside of a building or enclosure.
15970
 
Six antenna choices are offered. The 15970 is an omnidirectional antenna with a 1 dBd gain. It includes adhesive backing that adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. A 79 in. cable is provided for attaching the antenna to the CR211X. The 15970 must reside inside of a building or enclosure.
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
Either this cable or the COAXNTN-L (see below) is required when using the 14201 or 14221 antennas. The COAXRPSMA-L is an LMR195 cable that terminates in a type N Male connector on the "antenna end" and a Reverse Polarity SMA (RPSMA) connector on the "transceiver end." This cable is recommended for applications where the cable length is less than 10 feet.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
Either this cable or the COAXRPSMA-L (see above) is required when using the 14201 or 14221 antennas. The COAXNTN-L is a low-loss RG8 coaxial cable that requires the 14462 surge suppressor to connect it to the CR206. The COAXNTN-L/14462 combination is recommended over the COAXRPSMA-L when the antenna cable is longer than 10 feet (as measured between the transceiver and the antenna) or when the CR211X is used in an environment susceptible to lightning or electrostatic buildup.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31314
 
The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
21212
 
This 3.1 m (10 ft) roll of 1 in-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.

Other Accessories

 
The 17159 is offered for customers who want a paper CR200(X)-Series Operator's Manual in a 3-ring binder.
ENC200
 
The ENC200 enclosure can house one CR211X datalogger and the 16869 Sealed Rechargeable Battery (see Compatibility). Five compression fittings are provided for sensor cable entry; there are also specialized connectors for a solar panel and system ground.
16869
 
This compact, sealed rechargeable, 12 V battery is optimized for use with a CR200X-series datalogger and the ENC200 Enclosure. The 16869 has an 0.8 Ahr (800 mAhr) capacity.
16876
 
The 16876 recharges the 16869 12 V, 0.8 Ahr battery via ac power. Its cable plugs into the ENC200's power connector.
16867
 
The 16867 attaches to the battery terminals on the CR211X. Power supplies such as the PS100 plug into this connector allowing them to power the logger.
7977
 
This shunt resistor converts a probe's 4-20 mA signal to a millivolt signal that can be measured by this data logger.
31312
 
Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector.
19335
 
The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N Female bulkhead connector on one end and an RPSMA plug (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195.

Replacement Parts

15598
 
The 15598 lithium battery powers the clock and SRAM when the primary 12 Vdc power supply is not connected. Campbell Scientific recommends replacing the battery every five years.
1113
 
The 1113 is used to attach sensor leads to screw terminals.
10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the data logger to the 9-pin RS-232 port of a computer. The cable is six feet long.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.