This product is no longer available and has been replaced by: CR1000. Some accessories, replacement parts, or services may still be available.

Other Accessories

The 17746 is offered for customers who want a paper CR1000 Operator's Manual in a 3-ring binder.
The CR1000WP insulated aluminum thermocouple cover is intended to reduce thermal gradients across the analog inputs.
This interface cable provides a USB connector on one end and a 9-pin male RS-232 connector on the other end.The USB connector attaches to the USB port on a PC, and the RS-232 connector attaches to the RS-232 port on the CR1000-4M.
The CR1000KD is used to check datalogger status, display or plot sensor readings and stored values, and to enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a CR1000-4M network.
The SC110 consists of two cables, each 2 feet (0.6 m) in length. One cable consists of a 9-pin male connector on one end with stripped leads on the other for connection to CR1000-4M Control Ports. The other cable is identical except that a 9-pin female connector replaces the male connector. By having two cables, connection of either an RS-232 DCE or DTE device is supported, depending on the cable used.

Replacement Parts

The 17315 cover protects the peripheral port and is available if the cover has been lost or damaged.
This knurled knob serves as the ground lug on the Wiring Panel.
The 1113 Flat-bladed screwdriver is used to attach sensor leads to the wiring panel's screw terminals.
The 13519 Lithium Battery fits inside of the CR1000-4M module. It powers the clock and SRAM when the primary 12 Vdc power supply is not connected. The battery can be replaced by the user; the process is illustrated in the CR1000 Operator's Manual.
This replacement terminal connects to the CR1000-4M's Wiring Panel. The screw terminals attach to wires from the system's power supply.
The 6554 Desiccant Pack fits inside of the CR1000-4M module. It is generally replaced when the internal lithium battery is replaced.
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. The cable is six feet long.
This type T, 5 in. thermocouple is attached to a differential channel on several of our datalogger wiring panels when the datalogger is shipped. A 3315 may be ordered to replace a thermocouple that has become lost or damaged.
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.