CMP11-L
 
CMP11-L Kipp & Zonen Pyranometer, ISO Secondary Standard
 
CMP11-L Options - show details
-L ft cable per sensor

Allowed values: 0-328 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 2 years
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(2) Bolts for mounting from original mfg
(1) Instruction Manual (including Calibration Certificate) from original mfg
(1) Sun Shield from original mfg
(1) Lens Cloth from original mfg
(2) Nylon washers from original mfg

Common Accessories

CM255
 
The CM255 is used for mounting the CMP3-L at an angle.
CM255LS
 
The CM255LS is an adjustable angle, adjustable plane mounting stand.
CVF4-L
 
CVF4-L Kipp & Zonen Ventilation Unit
 
The CVF4-L is a ventilator/heater for our CMP11 pyranometer. The ventilation unit improves the reliability and accuracy of the measurement by reducing dust, raindrops, and dew on the dome. The integrated heater can be used to disperse precipitation and melt frost, or even melt snow and ice in cold climates.
CVF4-L Options - show details
-L ft cable per CVF4

Allowed values: 0-328 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
31153
 
The 31153 is used to attach the CVF4 heater/ventilator to a crossarm or pole using either the CM220 right-angle mounting bracket or the 17953 Nu-Rail® fitting.
CMB200
 
The CMB200 Crossarm Brace Kit is designed to provide additional stability when using a crossarm mounted on Campbell Scientific tripods and towers. This kit provides support for crossarms with heavier or sensitive sensor loads, as well as added stability in higher winds. Each kit includes one brace arm and three sets of mounting brackets.

Other Accessories

CM265
 
CM265 Adjustable Solar Sensor Mounting Kit for Nextracker Torque Tube
 
The CM265 is a fully adjustable pyranometer mounting kit. It has been specifically designed for the limited space near the end cap of the NEXTracker Torque Tube, and it can be used with any other 12.7 cm (5 in.) diameter tube. The CM265 can be ordered with a standard top plate (same as CM255LS) for use with most common pyranometers or with a top plate designed for the VU01 ventilation unit.
Top Plate Option
-S -S w/Pyranometer Plate
-V -V w/VU01 Plate
CM260
 
CM260 Adjustable Solar Sensor Mounting Kit for ATI Torque Tube
 
The CM260 is a fully adjustable pyranometer mounting kit. It has been specifically designed for the limited space near the end cap of the ATI Torque Tube, and it can be used with any other 12.7 cm (5 in.) diameter tube. The CM260 can be ordered with a standard top plate (same as CM255LS) for use with most common pyranometers or with a top plate designed for the VU01 ventilation unit.
Top Plate Option
-S -S w/Pyranometer Plate
-V -V w/VU01 Plate

Replacement Parts

 
CMP11CBL-L Replacement Cable for CMP11
 
This cable is included with the CMP11-L for connecting the sensor to a datalogger. The CMP11CBL may be purchased to replace a lost or damaged cable. It may also be purchased to get a different cable termination option.
CMP11CBL-L Options - show details
-L ft per cable

Allowed values: 1-328 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.
 
The 27052 is a replacement desiccant pack for the CMP11's drying cartridge. The silica gel desiccant granules in the drying cartridge should be orange and opaque. Replace the desiccant granules when they become translucent (normally after several months).

Services

33475
 
The 33475 recalibration service is performed using an intermittent shade method with a World Radiometric Reference (WRR) traceable AHF cavity radiometer. The 33475 recalibration is ISO 17025 accredited to the following standards: ASTM G167 and ISO 9846.
33476
 
The 33476 recalibration service is performed using a reference group of pyranometers traceable to World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM E824 standard.
33477
 
The 33477 recalibration service is performed indoors using a reference pyranometer of the same make and model. Reference pyranometers are traceable to the World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM G207 standard.