CMP10-L
 
CMP10-L Kipp & Zonen ISO Secondary Standard Pyranometer
 
CMP10-L Options - show details
-L ft cable per sensor

Allowed values: 0-328 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 2 years
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(2) 34513 M5 x 65 mm Stainless-Steel Screw Cap Hex Socket
(2) 25848 Stainless-Steel M5 Spring Lock Washer
(1) Sun Shield from original mfg
(1) Lens Cloth from original mfg
(1) Instruction Manual (including Calibration Certificate) from original mfg

Common Accessories

CM255
 
One stand is needed per pyranometer. The CM255 is one of four options. The CM255 is used to mount the SR20-T2-L at an angle.
CM255LS
 
One stand is needed per pyranometer. The CM255LS is one of four options. The CM255LS is an adjustable angle, adjustable plane mounting stand.
CM260
 
CM260 Adjustable Solar Sensor Mounting Kit for ATI Torque Tube
 
One stand is needed per pyranometer. The CM260 is one of four options. It has been specifically designed for the limited space near the end cap of the ATI Torque Tube and can be used with any other 12.7 cm (5 in.) diameter tube.
Top Plate Option
-S -S w/Pyranometer Plate
-V -V w/VU01 Plate
CM265
 
CM265 Adjustable Solar Sensor Mounting Kit for Nextracker Torque Tube
 
One stand is needed per pyranometer. The CM265 is one of four options. It has been specifically designed for the limited space near the end cap of the NEXTracker Torque Tube, and it can be used with any other 12.7 cm (5 in.) diameter tube.
Top Plate Option
-S -S w/Pyranometer Plate
-V -V w/VU01 Plate
CVF4-L
 
CVF4-L Kipp & Zonen Ventilation Unit
 
The CVF4-L is a ventilator/heater for the pyranometer. The ventilation unit improves the reliability and accuracy of the measurement by reducing dust, raindrops, and dew on the dome. The integrated heater can be used to disperse precipitation and melt frost, or even melt snow and ice in cold climates.
CVF4-L Options - show details
-L ft cable per CVF4

Allowed values: 0-328 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
31153
 
One 31153 is needed per CVF4-L. The 31153 is used to attach the CVF4 heater/ventilator to a crossarm or pole using either the CM220 right-angle mounting bracket or the 17953 Nu-Rail® fitting.
CMB200
 
The CMB200 Crossarm Brace Kit is designed to provide additional stability when using a crossarm mounted on Campbell Scientific tripods and towers. This kit provides support for crossarms with heavier or sensitive sensor loads, as well as added stability in higher winds. Each kit includes one brace arm and three sets of mounting brackets.

Replacement Parts

 
CMP10CBL-L CMP10 Replacement Cable
 
This cable is included with the CMP10-L for connecting the sensor to a data logger. The CMP10CBL-L may be purchased to replace a lost or damaged cable. It may also be purchased to get a different cable termination option.
CMP10CBL-L Options - show details
-L ft per cable

Allowed values: 1-328 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
 
The 34513 may be purchased to replace a lost or damaged socket.
 
The 25848 may be purchased to replace a lost or damaged washer.

Services

33475
 
The 33475 recalibration service is performed using an intermittent shade method with a World Radiometric Reference (WRR) traceable AHF cavity radiometer. The 33475 recalibration is ISO 17025 accredited to the following standards: ASTM G167 and ISO 9846.
33476
 
The 33476 recalibration service is performed using a reference group of pyranometers traceable to World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM E824 standard.
33477
 
The 33477 recalibration service is performed indoors using a reference pyranometer of the same make and model. Reference pyranometers are traceable to the World Radiometric Reference (WRR). This recalibration is ISO 17025 accredited to ASTM G207 standard.