Mounting Poles / CM375
Product Details
Typically Ships Within 0 - 7 Days
Restockable Yes
Warranty 1 year
Compliance –

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Common Accessories

22071 CM375 Guy Cable Tensioning Kit
 
The 22071 provides equipment used to tension the guy wires and align the mast. This equipment helps facilitate the CM375's installation.
19282
19282 Duckbill Standard Anchor Kit
 
Two duckbill anchor kits are offered for anchoring the guy wires. The 19282 Duckbill Standard Anchor Kit is recommended for areas with standard soils. For aggressive soils, use the 25699 Guy Duckbill Heavy Duty Anchor Kit (see below).
25699
25699 Duckbill Heavy Duty Anchor Kit
 
The 25699 Guy Duckbill Heavy Duty Anchor Kit is recommended for areas with aggressive soils. Aggressive soils have resistivity of less than 3000 ohm-cm; pH of less than 5; chloride of greater than 1000 ppm; sulfate of greater than 500 ppm; or poor aeration.

Replacement Parts

21720 CM375 Tote
 
This tote is included with the CM375. All of the CM375's components fit inside of the 21720. It facilitates transporting the mast from site to site. The 21720 is available to replace a lost or damaged tote.
21661 CM375 Top Guy Kit
 
The 21661 contains guy wires, a guy collar, and guy rings. This kit is used to install the guy wires at the 24-foot height.
21663 CM375 Bottom Guy Kit
 
The 21663 contains guy wires, a guy collar, and guy rings. This kit is used to install the guy wires at the 12-foot height.
21660 CM375 Grounding Kit
 
The 21660 includes a lightning rod, ground rod, and components to connect the datalogger enclosure and mast to the ground rod.
17049
17049 Grounding Spike, 1/2 x 16 Galvanized Steel
 
Three of these grounding stakes are included with the CM375. They are used to secure the base of the CM375 to the ground. The 17049 may be purchased to replace a lost or damaged stake.
21669 CM375 Sensor Crossarm w/one Mounting Kit, 40 inch long
 
The 21669 consists of a 1-m crossarm and crossarm mounting hardware. It is included with each CM375 mast. The 21669 may be purchased to replace a lost or damaged crossarm.