CM110 Ordering Information

This kit is included with the CM110 purchase, but may be also ordered as an replacement item. The 19238 consists of a lightning rod, ground rod, and components to connect the datalogger enclosure and tripod to the ground rod.

The 17589 provides the clamp and hardware used to attach a lightning rod onto a station.

The 17049 may be purchased to replace a lost or damaged spike.

A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cables, then trimmed back to the locking end. Once attached, the cable tie must be cut to be removed.

This clamp attaches a grounding rod onto the tripod, tower, or ET pole. The 2830 may be purchased to replace a lost or damaged clamp.

The 2832 may be purchased to replace a lost or damaged grounding rod. Properly grounding a tripod or tower helps protect the equipment from lightning.

This 4 AWG copper wire typically connects a ground lug to a ground rod. You can order the 2833 in custom lengths for replacement purposes or for non-standard applications.

This 12 AWG copper wire provides a ground lug-to-tripod ground connection. The 2834 orders the copper wire only; hardware for attaching the wire is not provided.

The 850 may be ordered to replace a lost or damaged lightning rod.