CDM-VW305
 
CDM-VW305 8-Channel Dynamic Vibrating Wire Analyzer
 
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the CDM-VW305 includes a standard warranty of 12 months. See our full warranty policy in the CDM-VW305 manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our Extended Warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 29389 Parts Kit for CDM Peripherals

Common Accessories

28899
 
The 28899 is a 2 ft CAT6 cable for Ethernet communications.
28900
 
The 28900 is a 10 ft CAT5 cable for Ethernet communications.
28901
 
The 28901 is a 50 ft CAT5 cable for Ethernet communications.
CAT5UCBL-L
 
CAT5UCBL-L CAT5e Cable Unshielded w/RJ-45 Connectors
 
This is an RJ45 cable that is ordered to a customer-defined length. We have created this so when people are connecting CDM devices together or to a datalogger, they can have a custom-length cable if they do not want one of our set-length cables, which are: 6 in., 2 ft, 10 ft, or 50 ft.
Cable Length - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

29370
 
One CPI network kit is required for each CDM network.
29796
 
29796 Power Supply 24Vdc 1.67A Output, 100-240Vac 1A Input, 5ft Cable
 
The 29796 converts 100 to 240 Vac to a regulated 24 Vdc. It comes standard with a USA/Canada plug, with an option to add a kit for international use. The cable has 5 ft length and terminates in pigtails with "+" and "-" labels.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs
29388
 
This DIN-rail kit can facilitate wiring when several CDMs are connected to one terminal.
8125
 
If not ordering the datalogger on the same order, you might need this small, flat-bladed screwdriver.
HUB-CPI
 
The HUB-CPI allows eight CPI devices to be connected together in parallel. Typically, this configuration includes one datalogger and up to seven CDMs or sensors that use CPI.

Other Accessories

13947
 
This wall charger is needed to power the CDM-VW305 residing at a PC without the datalogger. The 8125 outputs 12 Vdc at 1.0 A. The 13947 has a 6-ft cable that terminates in pigtails for direct connection to the 12V and G power terminals on the CDM-VW305.
28558
 
These termination resistor plugs are included in the 29370 CPI Network Kit. The 28558 may also be purchased as a spare part.
SC-CPI
 
SC-CPI Datalogger Serial to CPI Interface
 
The SC-CPI is an interface between the serial port of later-model Campbell Scientific dataloggers (CR800/850, CR1000, and CR3000) and our new Campbell distributed modules (CDMs). The CDMs use the new CAN peripheral interface (CPI), and the SC-CPI allows the dataloggers listed above to connect to the CDM's CPI port.
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the SC-CPI includes a standard warranty of 12 months. See our full warranty policy in the SC-CP manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our extended warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.

Replacement Parts

26031
 
The 26031 is the power connector used on the CDM-VW305. It may be purchased to replace a lost or damaged connector.
29474
 
The 29474 is the ground lug on the CDM-VW305. It may be purchased to replace a lost or damaged ground lug.
29267
 
The 29267 Mounting Bracket fastens a CDM-VW305 to an enclosure backplate. This mounting bracket comes attached to the CDM-VW305. It may be purchased to replace a lost or damaged bracket.
19343
 
Two of these screws are used to attach the 29267 Mounting Bracket to the CDM-VW305.
30267
 
Four of these removable terminal plugs are provided on the CDM-VW305. The 30267 does not include the label. It may be purchased to replace a lost or damaged plug.
28898
 
The 28898 is a 6 in. CAT6 cable for Ethernet communications.
29389
 
The 29389 consists of the 28898 6 in. RJ45 to RJ45 cable, the 9634 black and 9635 red power wires, two 505 screws, and two 6044 grommets.