CCFC CSC Outdoor Observation & Surveillance Field Camera (-40 to +60C)
Communication Option
-R2 -R2 w/RS-232 Comms
-R4 -R4 w/RS-485 Comms

Add to your Quote List

Product Details
Restockable Yes
Warranty 2 years
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) Quick Deploy Guide from original mfg
(2) 18-8 Mounting Screws from original mfg
(2) 4365 Stainless-Steel Flat Washer 5/16
(2) Lock Washers from original mfg
(1) Lens Cleaner Wipes (pkg of 4) from original mfg
(1) 28840 Interface with Hood and Hardware Kit, DB9 Female to Terminal Block

Common Accessories

The 18549 kit is used to mount the CCFC camera onto a crossarm. The crossarm then attaches to a tripod, tower, or pole.
CCFCCBL1-L CCFC Power & I/O Cable
The CCFCCBL1-L cable connects the CCFC camera to a power supply and is required to use the camera. This cable can also connect the CCFC camera to a datalogger COM port, PC, or Serial Communications Interface (RS-232 or RS-485).
CCFCCBL1-L Options - show details
-L ~Qft per cable

Allowed values: 1-65 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
CCFCCBL3-L CCFC RJ45 Environmental Ethernet Cable for CCFC Serial# >= 1278
The CCFCCBL3-L Environmental Ethernet Cable connects the CCFC camera to a network router, cellular modem, or computer. With this connection, the user can access a web interface that allows adjustment of camera targeting/focusing; supports camera configuration; and displays camera information, system status, date, and time.

Note: This cable is designed for use with CCFC cameras that have a serial number of ≥ 1278. For CCFC cameras with a serial number of ≤ 1277, use the CCFCCBL2-L cable instead.
Cable Length - show details
-L ~Qft per cable

Allowed values: 1-230 ft, increments of 1 ft

The 28900 is a 10 ft, unshielded, CAT5e network cable with RJ45 connectors. It can be used to set up and configure the camera.
The 28033 provides in-line surge protection for Ethernet connections. It can be used to protect Ethernet products from damage by electrical transients conducted through the Ethernet cable. It may be needed if the CCFCCBL2-L is used.
The 28898 is a 6 in., unshielded, CAT6 network cable with RJ45 connectors. If the 28033 is used, the 28898 may be needed.
The 28899 is a 2 ft, unshielded CAT6 network cable with RJ45 connectors If the 28033 is used, the 28899 may be needed.

Replacement Parts

This flat 5/16 in. wash can be purchased to replace a lost or damaged washer.
This interface is a female fitting that allows wiring of a serial device with stripped and tinned leads to a serial port. A protective hood for the fitting is included.