Digital Cameras / CC640
RETIRED ›
This product is no longer available and has been replaced by: CC5MPX. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Other Accessories

18549
 
The 18549 mounts the 18543 enclosure to a CM202-series crossarm.
CABLE5CBL-L
 
CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
 
The CABLE5CBL-L is recommended for connecting the CC640 with an MD485 (see below). This 22 AWG, five-conductor cable has a Santoprene jacket and an aluminum Mylar shield.
CABLE5CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
 
CABLE3CBL-L 3-Conductor 22AWG Cable w/Drain
 
The CABLE3CBL-L is used for power and pulse connections. This 22 AWG, three-conductor cable has a Santoprene jacket and an aluminum Mylar shield.
CABLE3CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
COMCBL1-L
 
COMCBL1-L 9-Pin Male Weatherproof Cable w/Pigtails
 
This RS-232 cable terminates in pigtails for connection to the COM ports on a CR1000 or CR3000 datalogger. When the 19504 kit (see below) is used, this cable can attach to either the datalogger's RS-232 port or CS I/O port.
Cable Length - show details
-L ft per cable

Allowed values: 1-80 ft, increments of 1 ft

When used with the CC640 camera, the recommended maximum length is 25 feet.
MD485
 
MD485 RS-485 Multidrop Interface
 
The MD485 is an intelligent RS-485 interface that increases the distance allowed between the CC640 and the datalogger.
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the MD485 includes a standard warranty of 12 months. See our full warranty policy in the MD485 manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our Extended Warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.
15966
 
The 15966 is typically used when an MD485 is at the PC where ac power is available. This ac/dc transformer accepts inputs from 90 to 260 Vac @ 47 to 63 Hz, then outputs 12 Vdc @ 880 mA for use by the MD485.
14291
 
At the datalogger site, the MD485 is powered by the datalogger. Older dataloggers or dataloggers that are using the RS-232 port to communicate with the MD485 require the 14291 Field Power Cable to power the MD485 via the datalogger.
5563
 
This surge protector help suppress electrical transients that may be carried along a 4-wire transmission line.
6536
 
When used with the MD485, the 6536 4-Wire Surge Protector helps suppress electrical transients that may be carried along the transmission line. The 6536 includes a Joslyn box to cover the connections.

Replacement Parts

8125
 
The 8125 is a small, flat-bladed screwdriver that is extremely useful for opening the guillotine terminals on our dataloggers and measurement control devices.