OEM Products / 33201
33201
 
33201 CR300 Datalogger for OEMs (-40 to +70C)
 
Communication Options - show details
-NA -NA No Additional Coms
Comes with the standard communication methods only (USB, RS-232, etc.).
-RF412 -RF412 w/922MHz Radio
OEM Label Options - show details
-NL -NL No OEM Label
With this option, the datalogger is shipped without a label allowing the OEM to use their own label.
-X1 -X1 Company X NA Label
With this option, the datalogger will include a company label instead of the Campbell Scientific label.

Add to your Quote List


Product Details
Restockable Yes
Warranty 3 years
Compliance CE Compliance Image RoHS Compliance Image

Common Accessories

505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures. Three screws are needed per datalogger.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures. Three grommets are needed per datalogger.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
32265
 
A small, flat screwdriver for connecting wires to the 33201 measurement terminals.
3315
 
This type T, 5 in. thermocouple is attached to a differential channel on our 33201 datalogger wiring panels when the datalogger is shipped.

Replacement Parts

15598
 
This 3 V, lithium, coin-cell battery is included inside each CR300-series datalogger. The 15598 powers the clock and SRAM when the primary 12 Vdc power supply is not connected. The 15598 needs to be periodically replaced. Campbell Scientific recommends replacing the battery every five years.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.