27106T-L
 
27106T-L RM Young Vertical Anemometer w/CFT Propeller
 
27106T-L Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 14 ft—sensor mounted atop a CM106B, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
Cable Termination Options - show details
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.

Add to your Quote List


Product Details
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image
Ships With
(1) 1180 Crossarm Mount for CM10 or 27106T

Common Accessories

1049
 
This NU-RAIL® Slip-on Offset Crossover fitting can be used in place of the CM220 to attach the sensor to the 1.0-in IPS pipe of a CM202, CM204, or CM206 Crossarm.
CM220
 
The CM220 is used to mount the 27106T to a CM202, CM204, or CM206 Crossarm. It provides the same functionality as the 1049 NU-RAIL fitting.

Replacement Parts

 
27106TCBL-L 27106T Replacement Cable
 
The 27106TCBL-L consists of a 22-AWG cable with a Santoprene jacket and a connector for attachment to the 27106T anemometer. This cable can easily be replaced by the user.
27106TCBL-L Options - show details
-L ft per sensor cable

Allowed values: 1-1000 ft, increments of 1 ft

Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 14 ft—sensor mounted atop a CM106B, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
These lead lengths assume the sensor is mounted atop the tripod/tower via a CM202 crossarm.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
6702
 
The 6702 provides a shielded bearing with oil lube. The bearings can be replaced by the user. Two are required.
1180
 
The 1180 can be purchased to replace a lost or damaged mount.
 
The 34551 is a 22 cm (8.66 in.) diameter by 30 cm (11.81 in.) pitch polystyrene replacement propeller.