RETIRED ›
This product is no longer available and has been replaced by: 05108-L. Some accessories, replacement parts, or services may still be available.
05106-L
 
05106-L RM Young Wind Monitor Marine Version
 
05106-L Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 14 ft—sensor mounted atop a CM106B, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.
Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

17953
 
The 17953 NU-RAIL® Crossover Fitting is used to mount this sensor to a crossarm or a user-supplied 1" IPS pipe. This usage is equivalent to the functionality provided by the CM220 Right Angle Mounting Bracket.
CM220
 
The CM220 Right Angle Mounting Bracket is used to mount this sensor to a crossarm or a user-supplied 1" IPS pipe.
CM216
 
The CM216 Sensor Mount provides a connection point for this sensor to be attached to the top of a CM106B, CM110, CM115, or CM120 tripod.

Other Accessories

LLAC4
 
LLAC4 4-Channel Low-Level AC Conversion Module
 
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the LLAC4 includes a standard warranty of 12 months. See our full warranty policy in the LLAC4 manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our Extended Warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.

Replacement Parts

 
05106CBL-L Replacement Cable for 05106 or 05108
 
The 05106CBL-L Replacement Cable has a connector on one end and pigtails on the other end. The pigtails connect to the datalogger's input terminals. The connector connects to the 3-foot (1-m) cable that is attached to the Wind Monitor. The 05106CBL is typically ordered with 7, 10, 16, 21, or 31 ft length. These lengths provide a total cable length of 10, 13, 19, 24, or 34 ft.

The 05106CBL-L was previously ordered at the 17145.
05106CBL-L Options - show details
-L ft per sensor cable

Allowed values: 1-1000 , increments of 1

Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 14 ft—sensor mounted atop a CM106B, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.
30273
 
The 30273 provides one replacement sealed propeller shaft bearing for the 05106 Wind Monitor, Marine. Two are required.
30274
 
The 30274 provides one sealed vertical shaft bearing for the 05106 Wind Monitor, Marine. Two bearings are required.
 
The 3659 is an unthreaded pipe used to mount the sensor to a crossarm. The pipe is easily replaced by the user.