020C-L
 
020C-L Met One Wind Vane Sensor
 
020C-L Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 14 ft—sensor mounted atop a CM106B, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
These lead lengths assume the sensor is mounted atop the tripod/tower via a CM202 crossarm.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) NIST Test Certificate from original mfg
(1) Allen wrench (from original mfg)

Common Accessories

CM220
 
The CM220 is used to mount the 020C to a CM202, CM204, or CM206 Crossarm. The 28798 bushing is required to use the CM220.

Other Accessories

1049
 
This NU-RAIL® Slip-on Offset Crossover fitting can be used in place of the CM220 to attach the sensor to the 1.0" IPS pipe of a CM202, CM204, or CM206 Crossarm.

Replacement Parts

 
020CCBL-L 020C Replacement Cable
 
The 020CCBL has a connector for attachment to the 020C vane. This cable is shipped attached to the 020C and can easily be replaced by the user. Cable length is user specified.
020CCBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 11 ft—sensor mounted atop a CM6 via a CM202
  • 14 ft—sensor mounted atop a CM106, CM10, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
These lead lengths assume the sensor is mounted atop the tripod/tower via a CM202 crossarm.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.