Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
How to program the CR850 and CR 1000 to read only current (mA) Unilab 6
CR1000X ModbusServer() or ModbusSlave() What now? GNWCLZ 2
Configuring Data Logger For Serial Input/Output Quinton Kirsch 2
Sending current and "n" previous readings ludwigh 0
What is the 192.168.1.1 ? 19216811vn 5
Thermocouple psychrometer on CR6 : TCPsyc DavidCo 3
Variable in PortSet? raichlebw 4
Problem with CR6 and PC400 noele.leonardo 0
Limit Size of 2D Array saved in DataTable rstinst 0
How to configure in CR-BASIC RS-232 FOR ANEMOMETER Unilab 4
Vaisala WMT700 Sonic Anemometer with SDI-12 on CR1000X Logger gpswx4cster 0
Cell215 power uo once a week Pascal 4
TimeIntoInterval, even hour mystery! VMK 0
Campbell Software Developers Required rluthwaite 0
Cell210 to Cell210/NL100 Communication Hennigh 0
Wiring of SR20-T1 to CR1000 RosarioIac 0
RTMC Pro Task Manager Schedule Report Failed, "Last File Run Exit Code: -1073741819" Thein 0
Alias concentrate Pascal 2
95/4/30-g turbidity sensors dab11 0
Workhorse Sentinel ADCP and CR1000 Feliperr 5
When using Cardconvert with the command line interface it always converts to 24:00:00 time format instead 00:00:00 ignoring Midnight24=0 scholse1 0
Table not showing all variables dab11 0
Processing CR3000 Overwritten Files Bibek 0
SlowSequence versus TimeIntoInterval Snohomish County SWM 1
load cell voltage range Taggart 1
Comunicate Loggernet Admin 4.3 to Pi System JPinto 1
Increase the wait time in Device Config Utility smile 1
Access to multiple CR1000s from internet Hayan 2
How to convert hexadecimal to binary CR1000X tronix 1
Can 2 CRX9000's access/use one CAN card? BillsFan 1