Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR1000 logger with RS232-bluetooth adapter?


LennoxConner Aug 5, 2020 12:31 AM

i have a question about the use of a RS232-bluetooth adapter applied to a CR1000 logger.

Is there anyone that has already tried this solution? Could be compatibility problem?

How i have to modify connection option in the software on the pc?

There is a specific adapter model that is better to use? 

Sorry for all this question condensed in one post and thank in advance to everybody for the support!!


JDavis Aug 5, 2020 09:17 AM

There was a previous discussion about this.

https://www.campbellsci.com/forum?forum=1&l=thread&tid=3079 

If you get a bluetooth adapter that support serial port profile, it can work with a PC or the Android version of Loggerlink. It will not work with the iOS version of Loggerlink, due to Apple restrictions.

The AirConsole mentioned in the previous discusssion, may be preferred. It supports Wifi instead of bluetooth, so has better compatibility.


LennoxConner Aug 7, 2020 11:12 PM

i have a question about the use of a RS232-bluetooth adapter applied to a CR1000 logger.

Is there anyone that has already tried this solution? Could be compatibility problem?

How i have to modify omegle xender connection option in the software on the pc?

There is a specific adapter model that is better to use? 

Sorry for all this question condensed in one post and thank in advance to everybody for the support!!

thankyou my issue has been solved

Log in or register to post/reply in the forum.