FAQs Frequently Asked Questions about Our Products and Solutions

Ask a Question Ask a Question

All FAQs (1754 total: showing 1661-1680)

If multiple CR3000s are linked together via COM1─COM4 ports and configured as neighbors on a PakBus network, what is the best way to synchronize the data loggers so that the time stamps match?
Can the CR3000 take input from, and supply power to, different types of sensors that require different voltages?
Other than using an Ethernet connection, is there any way to remotely download data from a CR3000 and adjust the program?
Can a CR3000 be run with a 12 V switchable power supply?
Is there any difference in the hardware between a standard temperature range CR3000 and an extended temperature range CR3000?
How many control terminals are available on the CR3000?
What is the common mode voltage for a CR3000?
Can the CS10-L be used to measure amperage from a battery?
Can the CS10-L be used in a three-phase power situation?
Are the CR800 and CR1000 capable of being programmed through a CD100 or CR1000KD without the use of computer software?
Why do some modems work with an SC932 but not with an SC932A?
What is the difference between an SC932A and an SC932?
What is the best way to remove corrosion on the pins (inside and out) of the SC932A?
Will an SC932A provide what is needed to connect a data logger to an Ethernet cable?
Does the SC932A come with any cables?
How can an SC932A be used to directly download data from a data logger to a laptop in the field?
How many 4WPB100 modules are needed to measure the internal PRT in an NR01-L or CNR4-L 4-way net radiometer?
What's new in VisualWeather 3.1?
Which protocol does the CR500 use to communicate with a modem?
If a CR500 is disconnected from its power source, does the data logger keep the stored data in the flash memory, or does it erase the data definitively?

Previous Next