The CS425 was manufactured by Druck for use in surface, groundwater, or hostile fluid applications.It was similar to the CS420 (also retired), but was not as accurate. The sensor's accuracy was ±0.25% FS, BSL (combined non-linearity, hysteresis, and repeatability). The CS425 featured a titanium body with an isolated diaphragm and NEMA6 (IP68) ingress protection to 2300 feet of water.Read More
The "-L" on a product model indicates that the cable length is specified at the time of order.
The CS425 was removed from our pricing system on December 5, 2008.
|Operating Temperature Range||-2° to +30°C (compensated)|
|Diameter||2.0 cm (0.8 in.)|
|Length||10.2 cm (4.0 in.)|
|Weight||1.36 kg (3 lb)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
An excitation voltage from the datalogger and either one (four-wire gages) or two (six-wire gages) differential channels are required. Four wires can be used where cable lengths are short; six wires compensate for excitation voltage loss on long cables, thereby improving accuracy.
The CS425 is NOT compatible with the PST system. [Underwater connectors for vented transducers are available. Contact Druck for pricing and details.]