CM216 Sensor Mounting Kit for Top of Stainless-Steel Tripod Mast
Designed for CM100-Series Tripods
weather applications water applications energy applications gas flux & turbulence applications infrastructure applications soil applications

Overview

The CM216 provides both a 3/4-inch IPS (1.05-inch OD) and a 1-inch IPS (1.32-inch OD) mounting pipe that extends 4 inches above the mast. They are pipes with an adapter that bolts to the inside of the top of a CM106B tripod; a stainless-steel CM110, CM115, or CM120 tripod; or a CM300, CM305, or CM310 mounting pole. A sensor with a 1.05- or 1.32-inch OD fitting (typically a wind sensor or the R. M. Young rain/snow gage) can then be mounted on this pipe.

Read More

Images

Detailed Description

Note: The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.

Specifications

Reach Extends 10 cm (4 in.) above the mast
Outer Diameter 2.67 to 3.34 cm (1.05 to 1.315 in.)
Pipe Size 1.9 to 2.54 cm (0.75 to 1 in.) IPS

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Mounting Equipment

Product Compatible Note
CM10 (retired)
CM106 (retired)
CM106B
CM110 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM115 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM120 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM6 (retired)

Additional Compatibility Information

Wind Sensor Considerations

A lightning rod cannot be used when this mount attaches a Wind Monitor or a 03002 Wind Sentry atop the tripod’s mast. Therefore the CM216 is only recommended for mounting a Wind Monitor or 03002 if the deployment is short-term.

Privacy Policy Update

We've updated our privacy policy.  Learn More